Siyah Kadın Kemer Suni Deri Halka Detaylı Göğüs Aksesuarı

This black faux leather chest harness is built around a halter neckline that connects to a central chrome O-ring at the collar, then splits into two diagonal shoulder straps that anchor to a single vertical center strap running down to a symmetrical dual underbust band. Unlike single-band harnesses, the two horizontal underbust straps frame the ribcage with an additional O-ring on each side, giving the piece a structured, geometric silhouette rather than a loose cage effect.

Styling for Every Occasion

Worn over a fitted white turtleneck, the black straps create a sharp contrast that works for concerts, club nights, or editorial photo shoots. For a more everyday approach, layer it over a basic black or nude bodysuit so only the strap geometry shows — the halter neck sits cleanly above most crew or V-neck collars. The chrome O-rings catch light against sheer blouses for a festival or street-style look without the harness reading as costume. Avoid bulky chunky-knit sweaters underneath; the straps lose definition against thick fabric.

Sizing and Fit Range

The harness is designed to fit a chest circumference of roughly 70 cm to 95 cm, with the underbust straps sitting best at 60 cm to 85 cm underbust. The adjustable buckle points at the back neck strap and side connectors allow about 10 cm of adjustment range at each point. Petite frames under 155 cm may find the vertical center strap slightly long; taller builds over 175 cm should check that the dual underbust bands don't ride too high on the ribcage. This piece does not include built-in cup support — it is a decorative harness, not a bra replacement.

• Best fit: chest 70-95 cm, underbust 60-85 cm
• Adjustable at neck strap and lateral connectors, approximately 10 cm range each
• Vertical center strap length may run long on frames under 155 cm
• Not suitable as a standalone top — designed to layer over existing garments

Faux Leather Material and Care

The straps are cut from smooth matte faux leather (PU-coated polyester backing), approximately 1.2 cm wide throughout the construction. Hardware consists of chrome-plated metal O-rings and rivet studs — the O-rings measure roughly 2.5 cm internal diameter. Faux leather is water-resistant but not waterproof; avoid prolonged moisture exposure. Wipe clean with a dry or slightly damp cloth; do not machine wash, soak, or use solvent-based cleaners, which can crack the PU surface. Store flat or loosely coiled to prevent permanent kinks in the straps.

• Strap material: smooth matte faux leather (PU over polyester)
• Strap width: approximately 1.2 cm throughout
• Hardware: chrome-plated metal O-rings (~2.5 cm diameter) and rivet studs
• Care: wipe clean with dry cloth; no machine washing or soaking
• Storage: lay flat or loosely coiled to avoid strap creasing

Adjustable Harness Construction

The halter neck connector uses a sliding adjuster buckle rather than a snap closure, which means sizing changes require a few seconds of threading but stay more secure under movement than clip-on alternatives. The dual underbust bands are connected at each side by a short link to the O-ring hardware, keeping both bands parallel and preventing one from riding up independently. This linked construction is what separates it from simpler single-band harnesses in the same price category, offering a more polished geometric shape when worn.