Siyah Kadın Kemer Vücut Aksesuarı Altın Halka Detaylı

This black faux leather chest harness wraps the torso in a structured Y-silhouette, anchored by six gold-tone O-rings — a central chest ring, a pair on each side of the bust frame, and two on the lower waist strap. The 1.8 cm wide straps are finished with matching gold rivet studs, keeping every junction flat and secure against fabric.

Styling & Occasion

Worn over a white fitted turtleneck or a sheer bodysuit, the harness adds visible structure without bulk. For everyday use, layer it over a plain black T-shirt with high-waist trousers; the gold hardware reads as jewelry from a distance. For an evening look, pair with a blazer left open so the Y-strap detail shows at the chest — the strap width is narrow enough to sit cleanly under most lapels.

• Over a sheer blouse for a night-out layer with minimal coverage
• Across a fitted sweater for an affordable statement accessory in winter
• Beneath an open blazer or moto jacket for a structured street-style finish

Sizing & Fit

The waist strap fastens with a buckle closure and fits 60 cm to 80 cm waist circumference; the shoulder-to-waist strap length is adjustable within a 10 cm range via the rivet pin slots. This fit range suits most XS–L frames. Bodies with a very short torso (under 27 cm shoulder-to-navel) may find the lower O-ring sits lower than intended — that is an honest trade-off of the fixed-point strap design.

• Waist strap range: 60–80 cm circumference
• Shoulder-to-waist strap: adjustable across a 10 cm span
• Strap width: approximately 1.8 cm
• Best fit for XS to L torso sizes
• Fixed-point design limits adjustment for very short torsos under 27 cm

Material & Hardware Care

The straps are cut from smooth black faux leather (PU-coated fabric) with no lining — the inner face is the raw PU backing, which keeps the piece lightweight at roughly 180 g. Gold-tone hardware is zinc alloy with a brass-finish plating; avoid prolonged contact with water or perfume to preserve the finish. Wipe the straps clean with a slightly damp cloth and allow to air-dry flat. Do not machine wash or submerge. Store flat or rolled loosely to prevent crease marks in the PU surface.

• Material: smooth PU faux leather, no lining
• Hardware: zinc alloy with gold-tone brass plating
• Weight: approximately 180 g
• Care: wipe with damp cloth, air dry flat
• Avoid water, perfume, and prolonged heat exposure on hardware

Gold Hardware Detail

The six O-rings range from a 3 cm diameter center ring at chest level down to smaller 2 cm waist rings, so the scale steps down visually from top to bottom. All rings are fixed — they do not rotate or detach, which means they stay flush against the strap seams during wear. Riveted gold studs reinforce each strap junction at 4–5 cm intervals, giving the piece a finished, hardware-forward look that reads clearly from across a room.