Strappy Body Harness with O-Ring Detail

This black faux leather body harness features three vertical chest straps running from a studded choker neckband down to a fitted waist band, anchored at the center by a polished silver O-ring at the bust and a second O-ring at the abdomen. The structured layout creates a defined cage silhouette without padding or underwire, sitting flat against the torso.

Chest Strap Configuration

The harness uses a multi-strap chest panel rather than a single crossover design, giving it a more architectural look than standard single-ring styles. The neckband sits at collarbone height and is secured with silver dome studs spaced approximately 2 cm apart, adding texture without bulk. Both the bust O-ring and the waist O-ring are approximately 3 cm in inner diameter, large enough to thread through a belt or chain accessory if desired.

• Three parallel vertical straps across the chest, each roughly 1.5 cm wide
• Studded choker neckband with silver dome hardware
• Dual O-ring placement: one at bust center, one at abdomen
• Fitted waist band that sits snugly at the natural waist
• All-black matte faux leather with silver-tone metal hardware throughout

Styling and Occasion

Worn over a white or cream fitted turtleneck, the black straps create strong visual contrast for festival or concert outfits. For evening wear, layer it directly over a satin slip dress so the waist band cinches the fabric. The low-profile design also works under a sheer or mesh top, with the strap lines visible through the fabric. This is a daywear-adjacent layering piece, not a replacement garment, so pair it with at least one other clothing layer for most occasions.

• Over a sheer blouse or mesh top for layered streetwear
• On top of a slip dress or bodysuit for evening events
• Under an open blazer for an editorial fashion look

Sizing and Fit Notes

The adjustable back closures on the waist band accommodate a waist range of approximately 60 cm to 85 cm. The neckband has limited stretch, so it fits best on bust circumferences between 80 cm and 100 cm; buyers with a bust above 100 cm may find the vertical straps pull forward. The harness is not designed to provide support, only structure — it sits on top of the body rather than compressing it. If you are between sizes, size up for the neckband fit first.

Material and Care

The straps and bands are cut from matte faux leather (PU-coated fabric), which holds its shape wash after wash without cracking under normal use. The hardware is silver-tone zinc alloy — wipe with a dry cloth to prevent tarnishing. Do not machine wash; spot clean with a damp cloth and mild soap, then air dry flat. Avoid prolonged exposure to direct sunlight, which can fade the matte finish over time.