Göğüs Üzeri Seksi Harness

This black faux leather cage body harness features dual silver O-rings — one at the center chest and one at the lower torso — connected by a geometric web of narrow 1.2 cm straps studded with silver rivets. Unlike single-loop harnesses, the multi-panel cage layout spans from the halter neck down to the waist, creating a structured silhouette that reads as a complete top when layered over a bodysuit or under a sheer blouse.

Styling for Everyday and Night Out

The cage harness works across multiple occasions thanks to its clean strap geometry. For a daytime editorial look, layer it over a fitted black turtleneck or ribbed long-sleeve. For an evening outfit, wear it directly over bare skin beneath a blazer, letting the silver O-rings catch the light at the open lapels. A third option: cinch it over a slip dress at the waist to break up the fabric and add structure at the torso.

• Over a turtleneck — the black-on-black contrast highlights the strap pattern without being overpowering
• Under a sheer blouse — the cage outline shows through the fabric for a layered effect
• Paired with high-waisted trousers — the lower O-ring sits exactly at the waistband seam, anchoring the look

Sizing and Strap Fit

The halter neck strap and the two main chest straps each carry an adjustable buckle, giving a total chest adjustment range of approximately 70 cm to 100 cm. The lower cage section adjusts independently at both sides, suitable for torso lengths of roughly 28 cm to 38 cm from underbust to natural waist. The harness fits most XS–L body frames; it is not intended for plus sizes above 100 cm bust without additional extenders, which are sold separately.

• Chest range: adjustable from 70 cm to 100 cm via three buckle points
• Torso cage depth: fits 28–38 cm underbust-to-waist span
• Strap width: 1.2 cm flat faux leather strips
• Recommended fit: snug but not compressive — straps should lie flat without digging
• Not recommended for bust above 100 cm without extenders

Faux Leather Material and Care

The straps are cut from smooth matte faux leather (PU-coated polyester), which holds its shape under tension without stretching or curling at the edges. The silver-tone hardware is zinc alloy with an anti-tarnish plating — practical for occasional wear, though prolonged skin contact with sweat can dull the finish over time. To clean, wipe the straps with a lightly damp cloth and allow to air dry flat; do not submerge in water or machine wash, as the PU coating can delaminate at the seam edges.

• Material: PU faux leather over woven polyester base
• Hardware: zinc alloy O-rings and rivets, silver-tone finish
• Care: wipe clean with damp cloth, do not machine wash
• Avoid prolonged moisture exposure to preserve hardware plating

Construction and Hardware Details

Seven individual strap panels connect at two O-ring junctions, forming the cage geometry visible from the front. The rivet studs serve a structural role, securing strap overlaps rather than acting purely as decoration — each overlap point carries two rivets set 1.5 cm apart. The halter neck loop closes with a small metal buckle at the back of the neck, keeping the profile clean from the front. One honest trade-off: the all-hardware assembly means the harness has no stretch, so precise buckle adjustment before wearing is essential for comfort.