Strappy O-Ring Faux Leather Body Harness

This black faux leather chest harness sits across the upper torso in a triangular strap configuration, anchored by a central gold-tone O-ring at the sternum and two side rings at the ribcage. The narrow bands — approximately 1 cm wide — cross the chest and loop over both shoulders, creating a layered cage effect without added bulk. It is a standalone fashion accessory, not a supportive garment.

Chest Strap Configuration

Four main straps radiate from the center O-ring: two run diagonally upward toward the shoulder straps, and two wrap horizontally around the ribcage. Each junction is reinforced with a brass-tone rivet stud, visible at every strap crossing. The shoulder straps sit roughly 5–6 cm apart at the collarbone, keeping the harness centered during wear. The ribcage band closes at the back with an adjustable buckle, making it wearable across a range of torso lengths.

• Central O-ring diameter approximately 2 cm, gold-tone finish
• Side D-rings at the lower rib band for extra strap security
• Rivet studs at every major strap junction — visible hardware detail
• Shoulder straps loop over standard bra straps without clipping
• Back buckle adjusts the ribcage band by approximately 4–6 cm

How to Style This Harness

The most practical everyday pairing is over a fitted white or nude T-shirt — the black straps read as a graphic detail against a plain base. For evening wear, layer it over a deep-V bodysuit or a sheer mesh top so the gold hardware catches light at the neckline. The triangular front panel also sits cleanly over a plunge bra, which is exactly how it is styled in the product image. Avoid pairing with busy prints — the strap geometry needs a solid or tonal base to read clearly.

• Over a plunge bra for a lingerie-as-outerwear look
• Layered over a fitted ribbed tank for casual daytime edge
• On top of a sheer blouse for a festival or concert outfit

Sizing and Fit Notes

The adjustable back buckle accommodates a ribcage circumference of roughly 65–90 cm. The shoulder straps have minimal adjustment range, so the harness fits best on torsos where the distance from shoulder to underbust is between 28–36 cm. Petite frames may find the strap spacing slightly wide at the collarbone; very full-bust wearers should check that the diagonal straps sit flat without pulling. This harness is not designed for plus-size torsos above approximately 100 cm ribcage.

• Adjustable ribcage band: fits approximately 65–90 cm circumference
• Recommended shoulder-to-underbust length: 28–36 cm
• Not recommended for ribcage measurements above approximately 100 cm
• One size — check your measurements before ordering

Material and Care

The straps are constructed from faux leather (PU-coated fabric), which gives the matte black surface a subtle sheen without the stiffness of genuine leather. The gold-tone hardware is zinc alloy; it resists light tarnishing but should not be submerged in water for extended periods. Hand wash only in cool water with mild soap, reshape while damp, and lay flat to dry away from direct heat. Do not tumble dry or iron — heat distorts PU-coated materials. With careful handling, the finish remains intact through regular seasonal wear, though heavy daily friction at the buckle points will show wear faster than the strap surfaces.