Strappy O-Ring Faux Leather Body Harness

This black faux leather body harness runs from a single neck strap down through a structured chest frame, connecting at two stacked O-rings — one at the chest center and one at the midriff — before splitting into triple horizontal waist bands. Strap width is approximately 1.5 cm, keeping the silhouette graphic without adding bulk over outerwear.

Chest and Waist Strap Layout

The harness opens with a Y-neck configuration: one central strap descends from the neck and splits at the upper chest, where two silver-tone adjustable buckles sit on the shoulder straps for a precise fit. Below the chest O-ring, two parallel waist bands wrap horizontally and anchor into a lower O-ring, creating a layered cage effect across the torso. All connection points use silver rivet studs pressed directly into the faux leather for clean finish without exposed stitching.

• Dual O-rings positioned at chest center and midriff for structured layering
• Two silver-tone metal buckles on shoulder straps, each with 5 adjustment holes
• Triple horizontal waist bands create a cage effect below the chest
• Silver rivet studs at all strap junction points
• Y-neck single strap with no collar band — wears close to the throat without a choker effect

How to Style for Everyday Occasions

Worn over a white fitted turtleneck and wide-leg trousers, the black strap grid reads as structured layering rather than costume. For festival or concert wear, pair directly over a bodysuit with high-waisted shorts — the waist bands sit naturally at the natural waist on a 65-75 cm waist without riding up during movement. A third option: layer under a sheer chiffon blouse left unbuttoned; the harness geometry shows through fabric while staying fully covered.

• Over turtleneck + wide-leg trousers for a structured daywear look
• Over bodysuit + high-waisted shorts for festival styling
• Under sheer blouse for layered, partially visible effect

Sizing and Fit Notes

The shoulder and chest buckles allow a chest circumference range of approximately 70 cm to 100 cm. The waist bands have fixed anchor points with minor rivet-hole adjustability, fitting a waist range of roughly 60 cm to 85 cm. The harness is one-size with multi-point adjustment rather than sized XS-XL. Wearers with a bust above 100 cm or a waist above 85 cm will find the waist bands pull taut — this is the primary fit trade-off. The neck strap is not adjustable; neck circumference comfort is best between 32 cm and 42 cm.

Faux Leather Material and Care

The straps are cut from smooth-grain faux leather (PU-coated fabric backing), which gives the flat, matte black surface visible in the product image. PU faux leather resists minor moisture contact better than genuine leather but will crack along fold lines if stored bent. Hardware is zinc-alloy with silver-tone plating — do not submerge in water. Wipe clean with a dry or slightly damp cloth only; do not machine wash, do not iron, and store flat or hung on a padded hanger to prevent strap kinking.