Studded Faux Leather Bra & Thong Harness Set

This two-piece black faux leather set pairs a cross-strap triangle bra with a center silver O-ring and a matching thong bottom, both lined with silver rivet studs along every strap edge. Unlike a single harness cage, the coordinated bra-and-thong construction gives a complete, finished look straight out of the box — no layering needed.

Stud & Ring Hardware Details

Each strap features evenly spaced silver dome rivets approximately 1.5 cm apart, pressed into the vegan leather for a flush, snag-free finish. The bra centers on a 25 mm silver O-ring, while the thong front carries a matching O-ring at the hip junction. The hardware is zinc-alloy with a brushed silver tone that contrasts sharply against the matte black faux leather surface.

• 25 mm silver zinc-alloy O-ring at bra center and thong front
• Silver dome rivets spaced approximately 1.5 cm along all straps
• Adjustable halter-neck tie closure — no hooks to snag lingerie
• Triangle bra cups formed by cross-strap lattice, not padded panels

How to Style & Occasion

The structured strap geometry works well layered over a sheer black mesh bodysuit for festival or club wear, with the rivet detail visible through the mesh. For a sharper outfit, pair the bra over a fitted black turtleneck crop top and high-waist trousers — the O-ring sits at neckline level and reads as statement jewelry. The thong bottom can be worn under low-rise jeans with the hip straps peaking above the waistband for a deliberately visible detail.

• Layered over a sheer mesh bodysuit for festival or nightlife looks
• Worn as a crop-top harness bra over a fitted turtleneck
• Paired with high-waist leather trousers for an all-black editorial look
• Hip straps intentionally visible above low-rise denim waistband

Sizing & Fit

The halter-neck straps tie at the back of the neck, allowing approximately 10 cm of length adjustment, making the bra workable for bust sizes roughly 75A through 90C. The thong bottom uses a side-strap slider system adjustable from about 60 cm to 90 cm hip circumference. Because the bra cups are open-lattice rather than padded, there is no structured cup support — buyers who need lift or coverage should layer a bralette underneath. The set is not recommended for hip circumferences above 92 cm as the side straps reach their maximum extension.

Material & Care

Straps are cut from 0.8 mm matte black vegan leather (PU-coated polyurethane) with no textile lining on the outer face. The inner strap surface has a thin foam backing to reduce edge dig-in during extended wear. Do not machine wash — wipe clean with a damp cloth and mild soap, then air dry flat. Avoid prolonged exposure to direct sunlight, which can fade the matte coating. The rivets are press-fit and not soldered; avoid soaking in water to prevent oxidation on the zinc hardware.

• 0.8 mm PU vegan leather — matte black finish, no shine
• Thin foam inner backing on strap reverse for edge comfort
• Wipe-clean only — damp cloth with mild soap, air dry flat
• Keep away from prolonged direct sunlight to preserve matte coating
• Trade-off: open-lattice bra cups offer no lift or coverage without a layer underneath