Studded Faux Leather Fringe Halter Dress Harness

The Studded Faux Leather Fringe Halter Dress Harness combines a structured black faux leather bralette top with a silver-studded perimeter and a floor-length fringe skirt panel attached at the waist belt. The asymmetric halter neck strap sits on one shoulder, creating a one-shoulder silhouette with an open back. Fringe strands measure approximately 70 cm in length, giving full floor coverage on most frames.

Halter Top and Stud Details

The bralette portion is cut from matte black faux leather and edged with rows of small silver metal studs along all outer seams. Two side-release buckle straps cinch beneath the bust for a snug fit, while a secondary waist belt with a center ring connects the top to the fringe skirt. The hardware is uniformly silver-tone, maintaining a consistent color palette across the piece.

• Single-shoulder halter strap with silver ring connector at neckline
• Row of silver studs along bralette edges, approximately 0.8 cm diameter each
• Two side adjustable buckle straps beneath the bust
• Waist belt with center O-ring, adjustable up to approximately 90 cm
• Matte black faux leather throughout the structured bodice section

Fringe Skirt Length and Movement

The skirt section consists entirely of cut faux leather fringe strands attached to a solid waist band. At roughly 70 cm of fringe drop, the hem reaches ankle or floor level on frames between 160 cm and 175 cm. The strands are narrow — approximately 0.5 cm wide — so they layer and swing freely with movement, which creates motion at the hem but also means the skirt offers minimal coverage on its own; wearing fitted shorts or a base layer underneath is recommended.

• Floor-length fringe of approximately 70 cm drop from waist band
• Individual strands cut to approximately 0.5 cm width for fluid movement
• Solid black waist band of approximately 6 cm height anchors all fringe
• Fringe and waist band share the same matte black faux leather material
• Open construction — base layer underneath is advisable for everyday wear

Sizing and Fit

The halter bralette is sized for a bust range of approximately 75 cm to 95 cm, adjusted via the buckle straps. The waist belt accommodates approximately 65 cm to 90 cm waist. Wearers with a waist above 90 cm may find the fringe panel sits too short; the piece is best suited to slim to standard athletic builds. The one-shoulder design relies on a single strap, so it is not recommended for high-intensity activities.

Material and Care

The entire piece is constructed from matte-finish vegan faux leather — a polyurethane-coated fabric that mimics the texture of leather without animal materials. There is no fabric lining on the bralette interior, so wearing adhesive nipple covers beneath is typical. Buckles and studs are zinc-alloy silver-tone hardware. To care for the piece, wipe clean with a damp cloth only — do not machine wash, submerge in water, or iron; heat damages the PU coating and can cause cracking over time.