Studded Faux Leather Underbust Harness with Halter Strap

This black faux leather underbust harness wraps the ribcage with two horizontal bands studded along the front, secured by silver O-ring hardware at each side and at the center front. A thin halter strap rises from the chest band to tie at the back of the neck, holding the piece in place without a back closure. The silhouette sits entirely above the waist, framing the underbust rather than compressing it.

Styling for Daily Wear

The harness layers cleanly over a fitted beige or white tank top for an off-duty street look. Worn over a loose button-front shirt left open, the studded front band becomes the focal point of the outfit. For an evening out, pair it directly over a bodysuit or a low-back top — the halter strap disappears under a collar or behind a jacket lapel.

• Over a tank top and high-waist trousers for smart-casual styling
• Layered on a sheer blouse for a structured contrast
• Worn over a midi dress to break up a single-color silhouette
• Paired with a blazer for a rocker-edge office look

Fit and Sizing Notes

The underbust band sits at the ribcage, approximately 5 cm below the bust line. The O-ring side closures allow the band circumference to be adjusted within a range suited to ribcage measurements of roughly 70 cm to 90 cm. The halter strap length is adjustable at the neck tie, accommodating different torso lengths. The harness does not provide bust support and is worn over an existing top or bra — buyers wanting an all-in-one coverage piece should note this limitation.

• Adjustable side O-ring closures for ribcage sizes approximately 70-90 cm
• Halter strap ties at the neck for length customization
• Does not replace a bra — designed to layer over existing tops
• Flat strap width approximately 1.5 cm for a slim, graphic line

Material and Care

The straps are cut from smooth faux leather (PU coated fabric), giving a matte black finish that does not crack or peel under normal wear. The silver-tone studs are pressed metal set at even intervals across both horizontal bands. There is no fabric lining — the inner face of the strap is the reverse of the PU material, which sits comfortably against clothing. Hand wash in cool water or wipe clean with a damp cloth; machine washing is not recommended as agitation can loosen the stud settings. Air dry flat away from direct heat.

• Faux leather (PU) straps with matte black finish
• Pressed silver-tone metal studs set at uniform spacing
• Hand wash or wipe clean only — machine washing risks stud loss
• Hardware: silver O-rings and stud rivets, not intended for submersion

Wear Versatility

Because the harness sits above the waist and the halter strap is narrow, it works well under open outerwear without adding bulk. The stud detailing catches light without sequin-level sparkle — suitable for daytime casual and evening wear alike. Buyers looking for a chunkier chain accent or a full-body configuration should note this piece covers only the chest-to-underbust zone.