Taba Kadın Kemer Geniş Korse Deri Tokalı Bel Aksesuarı

This tan faux leather underbust corset harness sets itself apart from standard waist belts through its three-dimensional wide panel construction — broad, angled leather pieces wrap the lower torso, creating a corseted silhouette without boning. Two adjustable shoulder straps extend from the waist frame and cross at the back, distributing the structure across the upper body rather than relying on the waist alone.

Tan Faux Leather Panel Structure

The body of the harness is cut from smooth, matte-finish tan faux leather panels. The main underbust band sits approximately 10 to 12 cm wide at the front, while the lower asymmetric panel adds an additional 8 to 10 cm of coverage over the hip. Silver-tone O-ring and rectangular buckle hardware sit at the center front and sides, securing the fit and adding industrial contrast against the warm tan. Rivet detailing along the panel edges reinforces stress points without adding bulk.

• Smooth matte tan faux leather body panels throughout
• Center front O-ring in silver-tone metal hardware
• Two side buckles allow waist adjustment of approximately 60 to 90 cm
• Rivet-reinforced panel edges for structural durability
• Thin adjustable shoulder straps, roughly 1.5 cm wide, with slide adjusters

Styling & Occasion

The corset harness layers cleanly over fitted garments, acting as a waist-cinching accessory rather than standalone outerwear. For a daytime look, wear it over a crisp white cotton shirt tucked into wide-leg trousers — the tan reads as a neutral and the structured panels replace a conventional belt. For evening, pull it over a black satin slip dress; the silver hardware and contrasting tan create enough visual interest that minimal additional jewelry is needed. Note that the wide panels sit close to the body, so pairing with very thick knitwear can push the harness out of position — best over thin to medium-weight fabrics.

• Layer over fitted shirts for a structured daytime waist look
• Wear over slip dresses or lightweight blouses for evening styling
• Pairs with high-waisted trousers, skirts, or wide-leg pants
• Works as a waist-defining statement over longline blazers

Sizing & Fit

The adjustable buckle system accommodates waist measurements between approximately 60 cm and 90 cm. The shoulder straps extend to fit torso lengths of roughly 40 to 55 cm from the waist band to shoulder. This harness is designed for a snug, corseted feel — wearers who prefer a loose or relaxed fit may find the structured panels uncomfortable over extended wear. It sits below the bust and above the hips, so a standard size S to L range is typically the most comfortable fit. Those with a waist above 90 cm should size up or may find the straps too short.

Material & Care

The panels are constructed from faux leather (PU-coated fabric), which resists minor surface scuffs better than natural suede but can crease if stored folded under pressure. The lining where straps meet the metal hardware is reinforced with an inner fabric layer to prevent fraying. Clean the surface with a slightly damp cloth and a small amount of mild soap — do not submerge in water, do not tumble dry, and avoid prolonged exposure to direct sunlight as this can cause the tan pigment to fade unevenly over time.

• Outer: PU faux leather — matte tan finish, smooth texture
• Hardware: silver-tone zinc alloy O-ring and rectangular buckles
• Wipe clean with damp cloth and mild soap only
• Do not machine wash, bleach, or tumble dry
• Store flat or hung to avoid creasing the wide panels