Two-Row Ring Choker with Front O-Ring Pendant

The Two-Row Ring Choker with Front O-Ring Pendant is a structured neck accessory built around two parallel rows of interlocked silver-toned rings set on a black base band, finishing at the front with a connector ring that suspends a large, approximately 6 cm diameter silver O-ring pendant. Unlike single-strand chokers, this piece has visible layering depth right at the collarbone.

Ring Hardware and Construction

Each row consists of small oval rings threaded through a black base strip and fastened with dome-head rivets. The rings sit flush, creating a scaled, armour-like texture across the full width of the band.

• Two parallel ring rows spanning the full circumference of the band
• Dome-head silver rivets secure each ring to the black base strip
• Small silver connector O-ring joins both rows at center front
• Large pendant O-ring measures approximately 6 cm in diameter
• All metal hardware is silver-toned with a polished finish

Sizing and Fit

The choker band fits neck circumferences of roughly 30 cm to 40 cm; the double-row band width sits approximately 2.5 cm against the neck, making it visible and structured without restricting movement. It sits best on slender to average neck profiles — very thick necks may find the fit snug at the smaller end of the range. Check the listed size chart before ordering if your neck is above 38 cm.

• Fits neck circumferences from approximately 30 cm to 40 cm
• Band width approximately 2.5 cm across both rows combined
• Pendant drops roughly 7 cm below the lower ring row
• Not recommended for neck circumferences above 40 cm without size confirmation

Styling for Everyday and Evening Wear

Worn over a plain white fitted T-shirt, the black band and silver rings provide an easy contrast focal point for a casual daytime look. Paired with a low-cut black dress or a scoop-neck bodysuit, the large O-ring pendant frames the upper chest and works as a standalone accessory — no other necklaces needed. The piece also layers well under an open-collar shirt for a partial-visible effect. It suits both androgynous street styling and more dramatic evening outfits.

Material and Care

The base band is faux leather with no fabric lining — the inner surface is smooth synthetic material that sits directly on skin. The ring hardware is zinc alloy with a silver-tone plating. Wipe the faux leather band with a slightly damp cloth; avoid prolonged moisture exposure to prevent the plating from dulling. Store flat or hanging to keep the pendant ring from bending under pressure. Do not submerge in water — plating durability is a trade-off on a piece at this price point.