Deri Göğüs Harness Ve Choker-Tasma Takım

This black faux leather underbust harness combines a wide structured waist band (approx. 6 cm) with dual adjustable shoulder straps and a detachable silver-tone O-ring chain that drapes from the collar ring to the chest. Unlike flat ribbon-style harnesses, the thick waist band sits firmly at the natural waist and distributes pressure evenly, making it comfortable for a full day of wear.

Shoulder Strap Construction

Two vertical shoulder straps, each roughly 2 cm wide, run from the waist band to the collar piece through silver pin-buckle adjusters. The buckles let you shorten or lengthen each strap independently, so you can level the harness across different shoulder widths. A small D-ring at each hip point lets you clip accessories or attach a belt loop.

• Dual independent shoulder straps with pin-buckle adjusters
• D-rings at hip attachment points for optional accessories
• Collar ring accepts the detachable silver-tone chain or can be worn bare
• Strap width approx. 2 cm, waist band width approx. 6 cm
• Silver-tone hardware — not gold, matching all-silver chain

Sizing and Fit

The waist band uses a center front pin buckle that typically covers waist sizes from roughly 60 cm to 80 cm without an extension. Shoulder straps add another 8-10 cm of range. Wearers with a waist above 80 cm may find the band too snug; the shoulder straps alone can still be worn if the waist band is left open. Because the harness sits at the underbust/natural waist (not the hips), it reads best on silhouettes where the ribcage-to-hip ratio is visible.

• Waist range: approx. 60-80 cm with the center buckle
• Shoulder strap adjustment range: approx. 8-10 cm total
• Fits best on natural-waist silhouettes; less defined on straight torsos
• One size with adjustable hardware — not recommended above 80 cm waist

How to Style This Harness

Worn over a white ribbed crop top and a high-waist pleated skirt (as shown), the black waist band reads as an edgy belt alternative that ties together a monochrome outfit. For a warmer-season look, layer it directly over a plain black spaghetti-strap bodysuit; the chain falls against the chest and replaces a necklace. For autumn layering, pull it over a fitted turtleneck so the chain rests on top of the knit — a practical way to add structure to an otherwise soft silhouette. The detachable chain can be removed for a cleaner, hardware-only look during the day.

• Over a white crop top + pleated mini skirt for sharp monochrome contrast
• Over a spaghetti-strap bodysuit — chain replaces a chest necklace
• Layered over a turtleneck for autumn structure with a soft-knit base
• Chain removed for a minimalist, daily-use belt-style silhouette

Material and Care

The straps and waist band are made from faux leather (PU-coated fabric backing) — no animal leather used. The hardware is silver-tone zinc alloy. Faux leather of this construction is not machine washable; wipe clean with a damp cloth and mild soap, then air-dry flat away from direct heat. Avoid folding the waist band sharply for storage — roll loosely or hang — to prevent cracking along the PU surface over time.

• Body: PU faux leather over fabric backing — vegan, no animal materials
• Hardware: silver-tone zinc alloy pin buckles and O-rings
• Chain: silver-tone metal links, fully detachable at collar ring
• Care: wipe clean only — no machine wash, no tumble dry
• Storage: roll loosely or hang; sharp folds may crack the PU surface