Winged Shoulder Harness with Fringe Skirt Set

This two-piece black faux leather set pairs a structured multi-strap back harness with sculpted winged epaulettes and a high-waist fringe skirt whose vertical strips extend to approximately 70 cm, leaving the legs fully visible between each strip. The shoulder wings are cut from the same matte faux leather and trimmed with silver-tone studs along the upper edge, giving them a rigid silhouette that stays in place without boning.

Back Harness Construction

The harness top uses five vertical straps that converge at a center ring on the upper back and a second ring at the waist band. A horizontal chest band and a wrap waist band anchor everything in place so the straps do not shift during movement. The silver-tone O-rings and snap closures allow the wearer to step in without threading straps through rings each time.

• Five back straps converging at two silver O-ring junctions
• Adjustable waist band with a snap closure at center back
• Studded winged epaulettes attached at shoulder seams with rivets
• Choker-style neck strap included as part of the harness top

Fringe Skirt Fit and Length

The skirt sits at the natural waist and is secured by a wide faux leather waistband approximately 8 cm tall. Below the waistband, the fringe strips hang straight in two layers — an inner shorter layer at roughly 30 cm and an outer full layer at roughly 70 cm — creating depth without bulk. The skirt fits best on hip measurements between 86 cm and 100 cm; above 100 cm the waistband will feel tight and the fringe spacing will widen visibly.

• Waistband height approximately 8 cm, structured faux leather
• Inner fringe layer approximately 30 cm, outer layer approximately 70 cm
• Best fit for hip circumference 86-100 cm
• Each fringe strip approximately 1.5 cm wide with clean-cut edges
• One limitation: fringe strips wrinkle if folded during storage — hang to keep shape

Styling and Occasion

Worn as a coordinated set, the harness and skirt read as a gothic-editorial costume suitable for themed photo shoots, Halloween events, burlesque performances, or avant-garde nightclub outfits. For a daytime editorial look, layer the harness top over a black fitted turtleneck and pair the fringe skirt with opaque tights — the fringe silhouette reads as architectural rather than costume in monochrome styling. For stage use, the back-strap design photographs clearly under spot lighting, making it a popular choice for performance artists who need a visually strong rear silhouette.

Material and Care

Both pieces are made from matte black faux leather (polyurethane-coated fabric) — not genuine leather. The material has a slight stretch along the bias, which helps the waistband conform to the body, but the harness straps are cut on-grain and do not stretch. The wings and fringe strips will hold their shape through regular wear but will crack if repeatedly creased sharply. Wipe clean only with a damp cloth; do not machine wash, do not submerge in water, and keep away from direct heat sources. Store both pieces flat or hanging to prevent permanent fold lines in the faux leather surface.