Y-Shape O-Ring Body Harness with Asymmetrical Strap Detail

This black vegan leather body harness follows a strict Y-shaped construction: two flat shoulder straps converge at a large center O-ring positioned at mid-chest, then a single strap descends to a second ring before splitting into two asymmetric side straps that curve around the waist. The result is a graphic silhouette that works as a visible fashion accessory rather than an undergarment.

Silver Hardware Placement

Five polished silver-tone O-rings anchor every structural junction on this harness. Two smaller rings sit at the upper shoulder-to-neck transition, distributing strap tension evenly so the straps lie flat without bunching. The two central rings, spaced roughly 8 cm apart vertically, create a stacked focal point at the sternum. A fifth ring joins the lower waist straps, locking the asymmetrical split in place.

• Two upper shoulder rings hold the V-neck opening at approximately 30 cm width
• Large center chest ring measures approximately 3 cm diameter
• Flat vegan leather straps are approximately 2 cm wide throughout
• Lower waist straps flare outward at an asymmetric angle — left strap is longer than right
• All rings are polished silver-tone metal, not gunmetal or gold

How to Style by Occasion

The harness pairs directly over a plain white fitted tee or a sheer long-sleeve top for a layered street-style outfit — the black straps create contrast against light fabrics. For evening wear, wear it over a black sleeveless bodysuit so only the silver rings read against the fabric. The Y-shape also works over a blazer as a belt alternative, cinching the waist line with the lower strap loop.

• Over a white tee and high-waist trousers for a daytime editorial look
• Layered on a sheer mesh top for a going-out outfit with built-in structure
• Worn over a blazer as a statement belt across the torso
• Paired with a slip dress where the shoulder straps frame a low neckline

Sizing and Fit Range

The harness is designed to fit a chest circumference of 70 cm to 100 cm thanks to adjustable buckle points on both shoulder straps. The lower waist band is sized for a waist circumference of 60 cm to 90 cm. The asymmetric side straps do not close fully — they rest open against the hips rather than wrapping the torso, so the fit is intentionally loose at the waist. This design works best on straight, athletic, and hourglass body types; it may not sit flat on very full busts above a 100 cm chest due to the fixed center ring placement.

Material and Care

The straps are cut from smooth faux leather (PU-coated fabric) with no visible lining on the outer face. The inner side of each strap has a matte textile backing that reduces friction against bare skin. To clean, wipe with a damp cloth and mild soap — do not submerge in water or machine wash, as prolonged moisture will cause the PU coating to peel at the edges. Store flat or loosely rolled to prevent permanent creasing at the ring attachment points.

• Outer surface: smooth PU faux leather, matte finish
• Inner surface: soft textile backing, approximately 2 mm thick
• Hardware: silver-tone zinc alloy O-rings, not plated brass
• Do not iron or tumble dry — heat will warp the PU surface
• Store away from direct sunlight to prevent color fading on the black straps