Adjustable Back Strap Harness with Silver O-Rings

This black faux leather back harness wraps the torso with four silver-finish O-rings positioned at the upper back, mid-waist, and lower spine, connected by flat straps approximately 2 cm wide. The geometric strap layout creates a symmetrical ladder pattern visible from behind, making it a standout layer over fitted shirts or worn directly on bare skin.

Back Strap Configuration

The harness runs from shoulder level down to a waistband clip, with two shoulder straps crossing at the upper back through a central O-ring, then splitting into side straps that pass through rings at the mid-back. A single vertical strap descends from there to the lower O-ring and terminates in a gold-tone clip at the waistband. All junction points are reinforced with silver rivets for durability.

• Four silver O-rings: one upper-back, two mid-side, one lower-center
• Flat black faux leather straps approximately 2 cm wide throughout
• Silver rivet hardware at every strap junction
• Single gold-tone snap clip at the lower waistband attachment
• Symmetrical ladder-back geometry for a clean rear profile

Sizing and Fit

The shoulder and torso straps include multiple adjustment points that accommodate chest circumferences roughly between 80 cm and 110 cm. The harness sits best on a medium-to-athletic torso build; wearers with very narrow shoulders may find the upper straps drift inward. Strap length is fixed at the waistband clip, so total torso length from shoulder to waist should be within approximately 45-60 cm for the lower strap to reach comfortably.

• Adjustable shoulder straps suit chest sizes roughly 80-110 cm
• Best fit on torso length 45-60 cm (shoulder to waist)
• Not recommended for torso lengths above 65 cm without extension
• Straps lay flat without bunching on an athletic or slim build

Styling for Everyday and Festival Wear

For a daily-wear look, layer the harness over a plain white or black crew-neck tee — the back detail becomes visible when you turn around, adding contrast without effort. For festival or night-out styling, wear it on bare skin under an open-back shirt or mesh tank; the structured black-and-silver geometry pairs cleanly with dark jeans or cargo trousers. The adjustable back strap design also works tucked under a light jacket for a subtle hint of hardware at the neckline.

• Over a crew-neck tee for an understated daily-wear contrast
• On bare skin under an open-back or mesh shirt for festival events
• Paired with dark jeans or cargo trousers for a monochrome night look

Material and Care

The straps are cut from smooth faux leather (PU) with a matte-to-semi-gloss finish. Hardware is silver-plated zinc alloy for the O-rings and rivets, with a single gold-tone brass snap at the waistband clip. Wipe the straps clean with a dry or slightly damp cloth — do not submerge in water or machine wash, as prolonged moisture weakens the PU bonding layer. Store flat or loosely coiled to prevent permanent crease marks in the strap material.