Adjustable Body Harness with Strappy Geometric Design

This black body harness is built from flat faux leather bands arranged in a deliberate geometric pattern — a neck collar with a single-pin buckle at the top feeds into crossing chest straps that form an X across the torso, then narrow at the waist before fanning out into a diamond-and-V configuration at the hip. Silver-tone metal O-rings and rivets appear at every junction point, keeping the geometry sharp and the structure stable during wear.

Chest and Collar Construction

The integrated collar sits flat around the neck and fastens with a metal single-pin buckle at the back — no separate choker needed. From the collar, two diagonal straps descend and cross at the sternum, anchored by a central O-ring. The cross-strap section covers roughly the chest and ribcage area, with each strap running approximately 1.5 cm wide. Riders of the strap at the sides connect to a horizontal waist band that defines the midsection.

• Neck collar with adjustable single-pin metal buckle
• Crossing chest straps secured by a central silver O-ring
• Strap width approximately 1.5 cm throughout
• Multiple silver-tone rivets reinforce every strap junction

Hip and Waist Geometry

Below the waist band, the harness continues with three lower straps that converge into a downward-pointing V shape at the front hip. This section adds structure without adding fabric bulk, making it suitable to wear over high-waisted pants, shorts, or a bodysuit. The lower straps adjust independently so the fit can be tailored between the waist and hip without altering the chest section. Note that the hip section sits low — if worn over trousers, the waistband of the trousers should sit at natural waist or below to avoid bunching.

• Geometric diamond-and-V lower strap layout at the hip
• Lower straps adjust independently from chest straps
• Designed to layer over tops, bodysuits, or high-waisted bottoms
• Silver-tone metal connectors hold shape without bulk

Styling and Occasion

The structured geometry reads clearly over a fitted black turtleneck for a festival or club look. For a more everyday edge, layer the harness over a plain white long-sleeve shirt — the black straps contrast sharply against light fabric. The collar means no separate choker is needed, which keeps the silhouette clean. The harness does not cover the torso, so it works as an overlay rather than a standalone piece; plan the base layer accordingly. It also pairs well over a slip dress for an event look that stays on the fashion side of the category.

Sizing and Fit

The harness is built to fit a torso circumference of approximately 65 cm to 95 cm at the chest and 60 cm to 90 cm at the waist, thanks to multiple adjustable buckle points. The collar fits neck circumferences from roughly 32 cm to 42 cm. If your torso is longer than average (above 70 cm from shoulder to hip), the lower strap section may sit higher on the hip than intended — this is a proportional limitation worth noting before purchase. The straps do not stretch, so accurate measurements at chest, waist, and neck are the most reliable sizing guide.

• Chest circumference range: approx. 65 cm to 95 cm
• Waist circumference range: approx. 60 cm to 90 cm
• Collar circumference range: approx. 32 cm to 42 cm
• Not recommended for torso lengths above 70 cm shoulder-to-hip without trying first
• Non-stretch straps — measure carefully before ordering

Material and Care

The straps are made from faux leather (PU-coated fabric), which holds its shape well and wipes clean easily. The silver-tone hardware is zinc alloy — durable under regular use but should not be submerged in water for extended periods. To clean, wipe the straps with a damp cloth and a small amount of mild soap; allow to air dry flat away from direct sunlight. Do not machine wash, tumble dry, or iron. Store flat or loosely rolled to avoid permanent creasing at the buckle points. The PU surface may show fine scratches over time with heavy use — this is a normal characteristic of the material rather than a defect.