Adjustable Faux Leather Chest Harness with O-Rings

This black faux leather chest harness sits across the chest and under the arms in a classic X-brace configuration, held together by two silver-tone O-rings — one centered at the sternum and one at the lower chest band. The straps measure approximately 2 cm wide and are reinforced with evenly spaced silver rivet studs along the lower chest band, giving the piece a structured, hardware-forward look without excess bulk.

Chest Strap Construction

The harness uses a shoulder-crossing design that distributes pressure across both shoulders and the torso, rather than relying on a single center ring. Adjustable slide buckles sit at the shoulder and side positions, allowing the strap length to be shortened or extended by roughly 8–10 cm per point. The lower chest band wraps horizontally and fastens at the back, providing a snug fit without cutting in at the ribs.

• Dual silver O-rings — one at the sternum, one on the lower chest band
• X-brace shoulder crossing for balanced weight distribution
• Four adjustable buckle points for a personalized fit
• Evenly spaced rivet studs along the lower horizontal strap
• Low-profile back closure with no exposed hardware bulk

Sizing and Fit

The harness fits chest circumferences from approximately 85 cm to 110 cm comfortably, making it suitable for most medium-to-large builds. Wearers with a chest below 80 cm may find the shoulder straps sit too wide; those above 115 cm should check that the lower band reaches the back closure without strain. The straps are not designed to layer over thick outerwear — they work best directly on skin or over a thin T-shirt or tank.

• Recommended chest range: 85–110 cm
• Strap width: approximately 2 cm throughout
• Not suitable for layering over heavy knitwear or jackets
• Fits slim, athletic, and standard male builds within the size range

Styling and Occasion

Worn over bare skin with slim-cut jeans and boots, the harness reads as a festival or concert outfit accent without requiring additional accessories. For a nightlife look, pair it over a white crew-neck T-shirt to contrast the black straps and let the silver hardware stand out. The clean black-and-silver palette also works in editorial or costume shoot contexts where a structured, graphic silhouette is needed. Because the design avoids chains or dangling attachments, it sits flat under an open jacket and does not snag on fabric — practical for longer events where you move around frequently.