Adjustable Faux Leather Garter Harness with Bow Detail

This black faux leather garter harness wraps around the upper thigh with two parallel horizontal straps connected by a central silver O-ring and finished with a sewn-on satin bow detail. The slim straps measure approximately 1 cm wide and buckle at the side, giving a precise fit without digging in.

Thigh Fit and Sizing

The harness is designed for upper-thigh wear and the adjustable buckle closure accommodates a thigh circumference of roughly 45 cm to 65 cm. It sits best about 5 cm below the hip crease. Very slim thighs under 44 cm may find the lower strap loose even at the tightest setting — that is the honest trade-off for a one-size adjustable design.

• Adjustable range: approximately 45 cm to 65 cm thigh circumference
• Strap width: 1 cm flat faux leather band
• Vertical strap spacing: roughly 4 cm between the two horizontal bands
• Central O-ring diameter: approximately 2 cm, silver-tone metal
• Not recommended for thighs under 44 cm — buckle reaches its smallest setting

Occasion and Outfit Pairing

The garter harness layers over sheer stockings or bare skin and pairs naturally with lingerie sets, but it also works as a visible accessory over opaque tights under a mini skirt for a night-out look. Two practical outfit combinations: wear it over black lace-top thigh-highs for a classic lingerie aesthetic, or layer it over a pair of sheer black tights beneath a pleated micro skirt for a street-edge fashion moment. The bow keeps the piece readable as a fashion accessory rather than hardware-only equipment.

• Over sheer stockings: accentuates the lace top edge with a contrasting matte strap
• Over bare skin: the black-on-skin contrast works for boudoir photography
• Under a mini skirt: lets the O-ring and bow peek below the hemline

Faux Leather Material and Care

The straps are made from faux leather (PU-coated polyester), which keeps the surface smooth and matte without the cracking common in thin vinyl alternatives. The bow is satin-finish fabric stitched directly to the strap — not glued — so it holds its shape after repeated wear. Hardware is silver-tone zinc alloy. Do not machine wash; wipe the faux leather clean with a damp cloth and allow to air dry flat. Avoid prolonged exposure to heat, which can cause PU surfaces to stiffen over time.

• Strap: PU-coated polyester faux leather, matte finish
• Bow: satin-finish polyester, stitched attachment
• Hardware: silver-tone zinc alloy O-ring and buckle slides
• Care: wipe clean with damp cloth, air dry — no machine washing

Adjustable Buckle Closure

Each strap ends in a simple pin-and-hole buckle positioned at the outer thigh, keeping the closure discreet when viewed from the front. The buckle slides through the strap in seconds, so the harness goes on and comes off quickly without fiddly clasps. The adjustment range spans roughly 20 cm, covering most adult thigh sizes in a single piece without requiring a separate size option.