Strappy Faux Leather Garter Harness

This black faux leather garter harness wraps around the hips and thighs with a signature X-cross strap configuration at the waist, two vertical connector straps down each leg, and fitted thigh-band closures secured by silver O-ring hardware. Unlike a standard leg garter, it frames the lower body as a single structured piece rather than two separate accessories.

Styling for Daily or Evening Wear

Wear over high-waisted shorts and a tucked-in top for a festival or concert look, or layer it over sheer tights beneath a mini skirt for an edgy evening outfit. The all-black colorway pairs with leather jackets, bodycon dresses, or oversized blazers without clashing. Because the thigh bands sit independently, cropped wide-leg trousers work too — only the waist X-cross stays visible above the waistband.

• Festival and concert layering over shorts or skirts
• Evening styling with sheer hosiery and mini dresses
• Street-style detail visible above high-waisted trousers

Fit and Sizing Notes

The waist band adjusts via side-slide buckles to fit approximately 60-90 cm hip circumference. The vertical connector straps have a fixed length suited to a torso-to-thigh distance of roughly 25-35 cm, meaning it fits best on heights between 155-175 cm. Thigh bands include a small O-ring tab allowing about 3-4 cm of adjustment. Note: the fixed strap length between waist and thigh makes this a poor fit for very short or very tall frames outside that height range.

• Hip/waist fit range: approximately 60-90 cm
• Optimal height range: 155-175 cm
• Thigh band adjustment: approximately 3-4 cm via O-ring tab
• Not recommended for hip circumference above 95 cm

Faux Leather Material and Care

The straps are cut from smooth faux leather (PU-coated fabric) with no lining — the underside sits directly against the skin. Strap width measures approximately 1.5 cm. The silver-tone O-ring hardware is zinc alloy; avoid prolonged contact with water to prevent tarnishing. Wipe clean with a damp cloth; do not machine wash or submerge. Store flat or loosely coiled to prevent permanent crease marks in the PU surface.

• Outer material: PU faux leather, approximately 1.5 cm strap width
• Hardware: silver zinc alloy O-rings and rivets
• Care: wipe with damp cloth only, no machine washing
• Storage: flat or loose coil to avoid PU cracking

Adjustable Garter Harness Construction

Each strap junction uses a pressed rivet fixing rather than stitching, which keeps the profile flat and snag-free under fabric layers. The X-cross front panel has a center rivet anchor point that distributes tension evenly across both hip sides. This is a fashion accessory harness — not load-bearing — and is sold as a single assembled piece. The minimalist black-on-black colorway means it reads as a subtle structural detail rather than a costume piece, making it practical for everyday layered looks as well as special-occasion styling.