Adjustable Faux Leather Harness with O-Ring

This black faux leather chest harness wraps from a structured collar strap down through cross-chest bands to a waist-cinching belt with a front O-ring, giving you a single wearable piece that covers neck to hip. The smooth matte faux leather sits about 2 cm wide on the main straps, giving enough presence without overwhelming lighter garments underneath.

Strap Layout and Hardware

The harness runs in three tiers: a neck band, an X-crossing chest section, and a lower waist band. Each tier connects through silver-tone metal O-rings and flat-bar buckles, so you adjust each zone independently rather than wrestling with a single slider. The studded detail points along the chest band add texture without adding weight.

• Neck collar strap, approximately 1.5 cm wide, sits at the base of the throat
• Two diagonal chest straps cross and join at a central vertical connector strip
• Waist band closes at the back with a standard pin buckle
• All hardware is silver-tone alloy — not gold, not mixed-metal
• Front waist O-ring, approximately 3 cm diameter, is a fixed accent rather than a detachable connector

Sizing and Fit

The multiple buckle points mean the harness fits a chest circumference of roughly 75 cm to 105 cm and a waist of 60 cm to 95 cm comfortably. If your measurements sit at the upper end of that range, the neck strap may feel snug — it is not suitable for neck circumferences above 40 cm. Layering over thick knitwear or padded outerwear will reduce the effective adjustment range by about one notch per buckle.

• Chest fit range: 75–105 cm circumference
• Waist fit range: 60–95 cm circumference
• Neck band adjusts between approximately 32–40 cm
• Not recommended as a standalone top — designed to layer over clothing

Styling and Occasion

The most direct styling route is the one shown: a fitted grey turtleneck mini dress underneath lets the black harness pop without competing for attention. For a daytime-appropriate option in cooler weather, wear it over a longline black blazer with the collar strap visible above the lapel. For a more minimal evening look, layer it over a white fitted shirt — the contrast between pale fabric and black straps reads as deliberate rather than costume-like. This piece suits urban streetwear outings, festival layering, and editorial photo sessions; it is not a gym or activewear piece.

Material and Care

The straps are smooth matte faux leather (PU-coated fabric) — it does not crack or peel under normal wear conditions, but prolonged contact with sharp metal edges on bags can scuff the surface over time. The inner side of each strap has a thin woven fabric lining that reduces direct skin contact. Do not machine wash or soak in water. Wipe clean with a slightly damp cloth, then air-dry flat away from direct heat. Store loosely coiled, not folded at sharp angles, to preserve the strap shape.

• Outer: PU faux leather, smooth matte finish
• Inner lining: woven fabric backing on all main straps
• Hardware: silver-tone zinc alloy O-rings and buckles
• Clean with a damp cloth only — no machine wash, no soaking