Adjustable Red Faux Leather Chest Harness

This chest harness is built from smooth red faux leather straps approximately 1 cm wide, arranged in a crossed pattern across the chest with a silver O-ring focal point at the center. Flat black star-shaped rivets punctuate each strap at regular intervals, giving the piece a distinct edge that separates it from plain strap harnesses. The halter-neck loop and back closure both adjust independently, so fit is genuinely customizable rather than one-size-fixed.

Strap Design and Hardware

The harness uses a four-strap crossed layout: two diagonal straps meet at a central silver-tone O-ring while a horizontal band wraps the ribcage and a halter loop connects at the neck. Every connection point is reinforced with a small metal rivet. The black star studs are pressed flat into the faux leather surface — they add texture without snagging on clothing layered over them. Hardware is silver-tone alloy; there is no gold-tone option in this colorway.

• Central silver O-ring diameter approximately 3 cm
• Flat black star rivets at 5-6 cm intervals along each strap
• Halter-neck loop adjusts from approximately 28 cm to 42 cm
• Ribcage band adjusts from approximately 60 cm to 100 cm
• Silver-tone alloy hardware throughout

Sizing and Fit

The harness fits a chest circumference of 70 cm to 100 cm when both the neck loop and the ribcage band are adjusted fully. The straps are non-elastic, so the fit depends entirely on the buckles — wearers outside this range will find the straps either too long or too short with no stretch to compensate. It sits best on a ribcage measurement of 65-85 cm; above that the strap angles shift slightly. For reference, this corresponds roughly to European bra band sizes 70 through 90.

• Chest circumference: 70-100 cm adjustable range
• Ribcage band: best fit at 65-85 cm underbust
• Strap width: approximately 1 cm throughout
• Not suitable for ribcage measurements above 100 cm
• One size; no alternative sizing available

Styling and Occasion

Worn over a sheer black mesh top, the red straps read as a bold layering detail for festival or club outings — the color contrast does the work without additional accessories. For a lower-key everyday use, the harness sits cleanly under a partially unbuttoned oversized white shirt, with just the O-ring and star studs visible at the neckline. The ribcage band is flat enough that it does not create visible lines under a fitted jacket, making it usable as an under-layer for workwear styled events where a subtle edge is the goal. Pair with high-waist trousers or a mini skirt to anchor the eye at the waist.

Material and Care

Straps are PU faux leather over a woven fabric base — the surface has a slight gloss finish visible in direct light, and the backing prevents the material from stretching out of shape with wear. The star rivets are metal pressed into the PU; do not submerge in water as this can loosen the rivet setting over time. Wipe clean with a damp cloth only — avoid alcohol-based cleaners that degrade the PU surface coating. Store flat or loosely coiled; folding sharply at the rivet points can crack the PU around the hardware over months of storage.