Back Cage Harness with O-Ring Collar & Adjustable Arm Straps

$37.35

Be the first to write one!

Estimated Delivery Date: July 20-22

Color

Please select a color

Size

Please select a size

Discreet Shipping

Plain Packaging

No Content on Invoice

🚚 Discreet packaging — no brand name visible

⚡ Same day dispatch (orders before 2:00 PM)

🔒 256-bit SSL secure checkout

SKU: APFT1061-S1
Weight: 0.200
Categories: Whips & Restraints

Product Details

Care Instructions	Wipe with damp cloth only; store flat, avoid machine washing
Lining	No lining; single-layer strap construction
Closure	Multiple silver-tone zinc alloy rectangular buckles
Material	PU faux leather straps, smooth matte finish

Frequently Asked Questions

It covers only the back. The cage grid runs from the O-ring collar down to hip level on the back, with arm bands around the upper arms. The front of the torso has no straps.

There are approximately 8-10 individual buckles — one per strap end. The arm bands and lower back straps require reaching behind you, so having someone assist makes it faster, though solo wear is possible with practice.

The arm bands adjust from roughly 25 cm to 38 cm circumference, so a 36 cm upper arm falls within range. At that size the bands will be near maximum, so comfort during extended wear may vary.

It can be worn over a bra strap or bodysuit as long as the back is accessible. Thin bra straps sit underneath without affecting the fit; thick padded straps may push the harness out of alignment.

The silver O-ring at the neckline is structural — it anchors the top ends of the two vertical spine straps, keeping the cage geometry stable. It is not rated for tension loads beyond the harness's own weight.

Product Detail

Black faux leather back cage harness with silver O-ring collar and grid strap construction across the full back.

✓Black faux leather straps approx 2 cm wide form a full back cage grid
✓Silver O-ring at collar anchors the vertical spine straps
✓Four horizontal cross-straps spaced roughly 8 cm apart down the back
✓Individual silver rectangular buckles on every strap for independent adjustment
✓Arm band loops fit upper arm circumferences from 25 cm to 38 cm
✓Adjustable back width range: 32 cm to 42 cm
✓PU faux leather surface wipes clean — not machine washable
✓Back-only coverage design requires an open-back or strapless base layer

This back cage harness wraps the torso in a structured grid of black faux leather straps — two vertical spine strips crossed by four horizontal bands — creating a cage silhouette that sits flush against the back. A silver O-ring at the collar anchors the top, while individual buckle closures on each strap let you dial in the fit without needing a second person.

Back Cage Strap Construction

The harness runs from collar to hip with a central vertical column and four horizontal cross-straps spaced roughly 8 cm apart. All intersections are reinforced with silver rectangular hardware. Arm bands loop around both upper arms, sitting about 5 cm below the shoulder seam, so the cage stays in place even during movement. The strap width is approximately 2 cm throughout, giving the grid a defined look without adding bulk.

Four horizontal back straps create the cage grid pattern
Two vertical spine straps run collar to waist
Separate arm band loops for both upper arms
Silver O-ring at neckline anchors the full structure
All buckles are individual — adjust each strap independently

Styling & Occasion

Worn over a white bodysuit or nude leotard (as shown), the black cage grid reads as a strong editorial layer for concert outfits or themed nights. Pair it over a sheer black turtleneck for an all-black everyday look that keeps the strap detail visible. For warmer events, the harness works directly on bare skin over high-waisted trousers — the grid fills the back without covering the front at all. Note: because this is a back-coverage piece, it works best with strapless or thin-strap tops that leave the back open.

Sizing & Fit

The adjustable buckles on every strap accommodate a back width of roughly 32 cm to 42 cm and a torso length (shoulder to hip) of 40 cm to 55 cm. The arm bands fit upper arm circumferences of approximately 25 cm to 38 cm. If your upper arm is wider than 38 cm, the arm bands will feel restrictive and the harness is not recommended. Body measurements matter more than clothing size here — measure your back width and upper arm before ordering.

Back width range: 32 cm to 42 cm via individual buckle adjustment
Torso length coverage: 40 cm to 55 cm shoulder to hip
Arm band circumference: 25 cm to 38 cm upper arm
Not suitable for upper arms exceeding 38 cm
Fits best on torso lengths 40 cm and above

Material & Care

Straps are cut from smooth faux leather (PU-coated fabric), which holds its shape through repeated buckle adjustments without cracking at flex points during typical use. Hardware is silver-tone zinc alloy — functional and consistent in finish across all buckles. Wipe the straps clean with a damp cloth only; do not submerge in water or machine wash. Store flat or loosely coiled to prevent permanent crease marks in the PU coating. The faux leather surface can scuff if pressed hard against rough textures, so hand-carry rather than pack tightly in a bag.