Adjustable Strappy Garter Harness with Handcuffs

This black faux leather garter harness wraps around the hips and waist with a multi-strap geometric construction, secured by silver-tone metal D-rings and side-release buckles at every adjustment point. The integrated wrist cuffs attach directly to the side straps, making this a two-piece set worn as one — no separate accessories needed.

Hip Strap Styling Options

Worn over high-waisted trousers, the harness frames the waist while the cuff straps hang visibly at the sides as a design element. Over a bodysuit or leotard, the crossed rear straps create a geometric focal point on the back. For festival or editorial shoots, pair with a structured blazer left open so the harness hardware catches the light at waist level — the silver buckles read clearly even in photos taken from a distance.

• Layer over a black bodysuit for a monochrome editorial look
• Wear over high-waisted wide-leg trousers for a structured contrast
• Use over a fitted mini dress for stage or performance outfits
• Pair with a cropped leather jacket for a moto-inspired silhouette

Adjustable Fit and Sizing

The hip band adjusts via individual buckles on both the front and rear straps, accommodating a hip circumference of roughly 70 cm to 100 cm. The wrist cuffs adjust separately with their own buckle closures and fit wrists from approximately 15 cm to 20 cm in circumference. The strap width across the main hip band measures approximately 2 cm, and the thinner cross straps are approximately 1.5 cm wide. This harness is not designed for very low hip measurements below 70 cm — the crossing rear panel will not lie flat on a smaller frame.

• Hip band adjustable from approximately 70 cm to 100 cm
• Wrist cuff circumference range approximately 15 cm to 20 cm
• Main strap width approximately 2 cm; cross straps approximately 1.5 cm
• Not recommended for hip measurements below 70 cm

Faux Leather Material and Care

The straps are constructed from vegan faux leather with a smooth matte-finish surface that holds its shape through repeated wear. The hardware is zinc-alloy with a silver-tone finish — it will not tarnish under normal indoor use, but prolonged exposure to moisture may cause minor surface dulling over time. Wipe clean with a dry or slightly damp cloth; do not submerge in water or machine wash. Store flat or hanging to prevent permanent creasing in the strap material.

• Vegan faux leather body; no animal-derived materials
• Zinc-alloy silver-tone D-rings, buckles, and connecting hardware
• Wipe clean only — no machine washing, no soaking
• Store flat or on a hanger to avoid strap creasing
• Avoid prolonged moisture exposure to preserve hardware finish

Wrist Cuff Construction

Each cuff is formed from the same faux leather strap material as the hip band, looped and secured with a dedicated buckle. The cuffs are fixed to the side sections of the harness by metal D-ring connectors — they can be positioned along the strap length but cannot be removed entirely without tools. For daily wear, the cuffs can be left loose and dangling as a decorative detail rather than worn around the wrists, which reduces the fit complexity considerably.