
Piente
Color
Size
Related Searches
Black faux leather single-shoulder harness with dual arm bands and silver hardware for men.
This black faux leather asymmetrical shoulder harness covers one shoulder and wraps the upper arm with two parallel bands, leaving the opposite side of the chest fully bare. The single-shoulder construction is the defining detail here — unlike full chest harnesses, this one layers over a shirt or sits directly on skin without needing a partner strap on the right side. Hardware is silver-tone rectangular buckles spaced at each strap junction.
The harness is sized to fit a chest circumference of roughly 86 to 106 cm via three adjustable buckle points along the chest strap and shoulder run. The dual arm bands sit at the upper bicep area, and each band adjusts independently through its own side-release-style buckle, accommodating arm circumferences from approximately 28 to 38 cm. Men with broader shoulders may find the shoulder cap section feels snug — size up if your shoulder width exceeds 48 cm.
The most straightforward look is worn directly over bare skin with dark-wash jeans and a chunky belt — the diagonal chest strap creates a visual line that draws the eye upward. For club or concert outfits, layer it over a fitted black turtleneck so only the silver buckles and the arm bands show above the fabric, adding structure to a monochrome outfit. It also pairs with a loose open-front linen shirt worn as a jacket, with the harness visible underneath as the sole accessory.
The asymmetrical cut works best on men with a medium to large athletic build — chest 88 to 104 cm is the sweet spot where both the arm bands and the diagonal chest strap tension properly without gapping. The harness is not recommended for chest measurements under 84 cm, as the chest strap will hang loose and the arm bands will slip. There is no separate XS/S/M/L sizing — the single adjustable size relies entirely on the buckle system.
| Product name | Asymmetrical Shoulder Harness with Arm Strap |
|---|---|
| Category | Mens Harness |
| Product code | APFTM136-S1 |
| Brand | Angels Passion |
| Colour | Black, Red |
| Sizes | XS/S, S/M, L/XL, 2XL/3XL, 4XL/5XL |
| Weight | 0.2 kg |
| Gender | Men |
| Country of origin | Türkiye |
| Care instructions | Wipe with dry or damp cloth only; no machine wash, no submersion |
|---|---|
| Lining | Thin bonded fabric backing on inner strap surface |
| Closure | Silver-tone rectangular adjustable buckles at all strap points |
| Material | Smooth matte PU faux leather, approximately 1.5 cm strap width |
Straps are made from smooth matte faux leather (PU) with a firm hand feel — not padded, so the 1.5 cm width sits flat against the skin without digging in during short wear periods. The backing is a thin fabric lining bonded to the PU shell. Wipe clean with a dry or slightly damp cloth; do not submerge in water or machine wash. Store flat or loosely coiled to avoid permanent crease marks in the PU surface. Prolonged direct sunlight exposure can dull the matte finish over time.
Your order is delivered in about 2 business days.
For hygiene reasons this product group is exempt from the right of withdrawal; returns and exchanges are not accepted.
This restriction never applies to a wrong, missing or faulty delivery — in that case your exchange or refund starts immediately.
Asymmetrical Shoulder Harness with Arm Strap
$46.06No reviews yet.
You can only review products you have purchased and received.