Black Faux Leather Body Harness with Heart Detailing

This black faux leather body harness runs from a fitted choker collar down through a structured chest frame, a cinched waist band, and hip-to-thigh strap loops — all connected by silver-tone O-ring hardware and anchored at the chest by a heart-shaped medallion accent. The multi-section construction means you are not simply wearing a single strap piece; each zone — collar, chest, waist, hip — adjusts independently.

Chest and Collar Construction

The upper section pairs a close-fitting choker collar with shoulder straps that cross into a triangular chest frame. A heart-shaped charm sits at the centre sternum, roughly 4 cm wide, giving the harness its signature focal point. Four silver O-rings at the shoulder-to-chest junctions allow for minor strap repositioning without tools.

• Fitted choker collar, approximately 1.5 cm wide, with adjustable back closure
• Triangular chest frame with central heart medallion accent
• Four silver O-rings at shoulder and chest junction points
• Shoulder straps sit flat against skin — no twisting under clothing

Waist, Hip, and Thigh Straps

Below the chest, a 2 cm wide waist band encircles the torso and connects via vertical straps to a hip frame. From the hip frame, two diagonal thigh loops descend, creating the full-body silhouette visible over the waist. Each strap section has a single-prong buckle so you can size up or down without cutting or replacing hardware.

• Waist band width: approximately 2 cm, sits above the natural waist
• Hip frame with two downward thigh loop straps
• Single-prong metal buckles on every adjustable section
• Vertical connector straps between chest and waist roughly 30-40 cm at default setting
• Thigh loops fit comfortably over 35-55 cm thigh circumference

Sizing and Fit Notes

The harness is sized for a torso height between roughly 60 and 80 cm from shoulder to hip — this covers UK sizes 6-14 at default buckle positions. If your torso is longer than 80 cm, the vertical connector straps may sit too short, pulling the waist band above the intended position. The collar fits neck circumferences of approximately 30-40 cm; those with larger necks should measure before ordering, as the collar has limited extension. The thigh loops are the most generous section and accommodate a range of leg sizes.

Material and Care

All straps are cut from smooth matte black faux leather — a PU-coated fabric that holds its shape after repeated wear. Hardware is silver-tone zinc alloy; it will not rust with normal indoor use but should not be submerged in water. Wipe straps with a damp cloth and mild soap only — do not machine wash, do not iron, do not dry-clean. Store flat or loosely rolled to prevent permanent crease marks in the PU surface.

• Straps: PU faux leather, smooth matte finish, no lining
• Hardware: silver-tone zinc alloy O-rings and buckles
• Care: wipe clean with damp cloth; no machine washing
• Storage: flat or loosely rolled to avoid crease marks