Erkek Göğüs Üzeri Deri Harness

This chest harness is built around three silver O-rings — one centered at the sternum and two at each shoulder — connected by flat 2 cm wide black faux leather straps that form a structured V-panel across the chest. The construction sits close to the body without bulk, making it practical over a plain tee or worn directly on skin.

Chest Sizing and Fit

The harness fits a chest circumference of approximately 85 to 110 cm through adjustable metal-prong buckles on the shoulder and chest straps. The flat strap layout works best on medium to broad chest builds; very narrow frames may find the shoulder straps sit wider than intended. The lower horizontal strap rests around the lower chest and can be positioned at the sternum or lower ribcage depending on body proportions.

• Adjustable shoulder straps accommodate shoulder widths from 38 to 48 cm
• Sternum O-ring sits at roughly mid-chest height on a 180 cm frame
• Strap width: 2 cm flat faux leather throughout
• Not recommended for chest sizes below 80 cm — straps will not sit flush

Faux Leather Material and Care

The straps are cut from smooth matte black vegan leather bonded to a thin textile backing, giving each strap a firm but flexible structure. The O-rings and small connector hardware are silver-tone zinc alloy. Over repeated flexing at buckle points, the outer coating may show light crease marks — this is standard for bonded faux leather at this price tier.

• Outer layer: PU-coated vegan leather, smooth matte finish
• Backing: woven polyester fabric for shape retention
• Hardware: silver-tone zinc alloy O-rings and prong buckles
• Care: wipe with a slightly damp cloth; do not submerge or machine wash
• Store flat or loosely coiled — tight folding at hardware edges accelerates wear

Styling and Occasion

Worn over a cropped sleeveless top, this harness reads as a layered streetwear piece at outdoor festivals or weekend markets. For a cleaner edge, pair it over a fitted black crewneck — the silver O-rings at the shoulders remain visible and add contrast without competing with a patterned shirt. The multi-strap front panel also works under an open blazer for a dressed-up look where only the center O-ring shows at the neckline. For everyday use in cooler weather, pull a bomber jacket on top and leave the jacket open so the shoulder hardware frames the chest.

• Festival or outdoor event: worn directly on skin over wide-leg trousers
• Street style: layered over a fitted white or black tee with slim jeans
• Evening look: paired with an open shirt or unzipped hoodie

Hardware and Strap Configuration

The front panel uses five connection points: two shoulder O-rings, one center sternum O-ring, and two lower side junctions where straps angle down from the chest panel to the horizontal base strap. The prong buckles allow independent adjustment on each side so the harness can be balanced on asymmetric frames. All metal components are attached with double-bar rivets rather than stitching, which prevents the hardware from rotating or slipping out of alignment during wear.