Black Faux Leather Choker & Garter Harness Set

This two-piece set combines a faux leather choker harness — featuring a chest O-ring connector and thin adjustable shoulder straps — with a pair of double-band thigh garters secured by small gold-tone O-ring hardware. Both pieces are cut from smooth, matte black faux leather that holds its shape without stiffness.

Choker Harness Construction

The choker section wraps snugly around the neck and connects via a single O-ring at center chest, then branches into two thin straps that converge at a second O-ring below the bust. Strap width measures approximately 0.8 cm, keeping the look sharp without bulk. The adjustable sliders let you shorten or lengthen each strap independently for a centered, symmetrical hang — useful for everyday styling over a low-cut top or under a sheer blouse.

• Neck band adjustable from approximately 30 cm to 40 cm circumference
• Gold-tone O-ring hardware at neck and chest anchor points
• Thin 0.8 cm straps minimize layering bulk under outerwear
• Works over a bodysuit, crop top, or directly against skin

Thigh Garter Band Details

The garter section consists of two parallel bands per leg, each connected by matching gold-tone O-rings at the front and back. The bands sit at mid-thigh and are independently adjustable so they stay in place regardless of thigh circumference. Note that the garters are decorative — they do not attach to stockings or hosiery.

• Double-band design with two O-ring connectors per band
• Band width approximately 0.8 cm, matching choker strap width
• Adjustable range fits thigh circumference from roughly 45 cm to 62 cm
• Smooth inner surface prevents rolling during wear
• Sold as a pair — both thighs included

Sizing and Fit Notes

The choker fits neck circumferences from 30 cm to 40 cm; if your neck measures over 40 cm, the band may feel tight. Thigh garters suit circumferences from 45 cm to 62 cm — wearers with thicker thighs may find the upper limit snug. The chest straps connect at one adjustable point rather than wrapping the torso, so there is no waist measurement to match — this is a key difference from a full-body harness.

Material and Care

Both pieces use smooth matte faux leather — a PU-coated fabric that mimics the look of genuine leather without animal products. The material is wipe-clean rather than machine washable: use a damp cloth with mild soap, then air dry flat. Avoid prolonged exposure to direct sunlight, which can cause PU coatings to crack over time. The gold-tone O-ring hardware is zinc alloy; pat dry after contact with moisture to preserve finish.

• Body: PU faux leather over textile base
• Hardware: zinc alloy O-rings with gold-tone finish
• Care: wipe clean with damp cloth, air dry flat
• Not machine washable — hand clean only