Black Faux Leather Full Body Harness with Choker & Cuffs

This three-piece black faux leather harness coordinates a chest harness, a hip harness, and a pair of wrist cuffs into one cohesive look. The chest section crosses at the sternum through a central O-ring, while silver chain loops drape between the straps — the chains are decorative and roughly 15 cm in span across the bust.

Chest & Hip Strap Construction

The upper body section runs two thin shoulder straps down to the O-ring, then fans out with a pair of horizontal chest straps that frame without fully covering. The hip belt wraps at waist level with multiple D-ring buckles and two chain drapes that fall diagonally across the hip for an asymmetric silhouette. All buckles are silver-toned metal, approximately 2 cm wide, and close via standard prong mechanism.

• Central chest O-ring in silver metal, approximately 3 cm diameter
• Hip belt with 4 visible D-ring attachment points in silver
• Decorative silver chain length across chest approximately 15 cm
• Hip chain drapes span roughly 20 cm diagonally
• Strap width approximately 1.5 cm throughout upper body section

Wrist Cuffs Detail

The included wrist cuffs are padded black faux leather, approximately 5 cm wide, closing with a double-prong buckle in silver. They can be worn separately from the body harness — over a blazer sleeve, for example — or paired together as photographed for a full coordinated look. The cuffs have a D-ring on the outer face for accessory attachment.

• Cuff width approximately 5 cm, padded inner lining for wrist comfort
• Double-prong silver buckle closure on each cuff
• D-ring on outer face of each cuff, silver-toned
• Detachable from the body harness — usable as standalone accessories

Sizing & Fit

The chest harness adjusts at the shoulder straps and hip section, accommodating a bust range of roughly 80–115 cm and a waist range of 65–105 cm. The model pictured wears a plus size, demonstrating the full extension range. The design is not recommended for bust measurements above 120 cm as the O-ring placement shifts and the chest straps lose their geometric line. The hip belt has limited vertical adjustment — it sits best approximately 4 cm above the hip bone, not at the natural waist.

Material & Care

All straps use faux leather (PU construction) over a woven fabric backing, which keeps the material flexible at low temperatures rather than cracking the way thinner PU pieces tend to. The silver hardware is zinc alloy. Wipe the faux leather with a damp cloth only — do not submerge or machine wash, and keep away from prolonged direct sunlight to prevent the PU surface from dulling. Store flat or hung by a single strap hook to avoid permanent kinks in the chest straps.

• Faux leather strap material: PU over woven backing, approximately 1.5 mm thick
• Hardware: zinc alloy, silver finish — avoid abrasive cleaners
• Wipe-clean only; do not machine wash or submerge
• Store flat or on a strap hook to preserve strap shape

Styling Occasions

Worn over a plain white or nude bodysuit, this black harness reads as a sharp layering piece for festival season or themed nights out — the silver chain detail photographs well under stage or club lighting. For a more everyday edge, pair the chest harness alone over a fitted black turtleneck and high-waist trousers; the wrist cuffs work equally well over a sweater sleeve. The hip harness layered over wide-leg trousers at hip level creates a belt-substitute look that pulls an otherwise plain outfit together without adding bulk.