İki Omuz Kanat Detaylı Şık Erkek Harness Kostüm, Gladyatör Erkek Kostüm

This black faux leather shoulder harness combines a chest-crossing strap system with two layered, scale-cut pauldron panels riveted with silver studs — a construction you won't find on flat chest harnesses. The center chest features a silver O-ring connector that anchors the upper and lower bands, keeping the whole piece stable during movement.

Armor Panel Construction

Each shoulder carries three overlapping faux leather plates, cut in a descending-scale pattern and fixed with silver dome rivets. Unlike single-strap shoulder harnesses, the rigid-yet-flexible panel stack sits 12-15 cm wide across each shoulder, distributing weight evenly and holding its shape. The panels are attached to adjustable buckle tabs at the shoulder tops — loosening or tightening takes seconds.

• Layered scale panels approximately 12-15 cm wide per shoulder for structured coverage
• Silver dome rivets secure each plate layer — no stitching-only construction
• Two silver roller-bar buckles at the shoulder tops for independent left-right adjustment
• Central silver O-ring (approximately 4 cm inner diameter) at mid-chest strap junction
• Chest and waist bands approximately 3 cm wide in smooth matte faux leather

Sizing and Fit

The shoulder tabs and chest band both adjust, making this harness suitable for chest circumferences roughly 85 to 110 cm. The shoulder-to-shoulder span works best for broader builds — narrower frames under 85 cm chest may find the pauldrons sit too far apart. The waist band sits just below the pecs, not at the natural waist, so torso length is not a limiting factor.

• Adjustable chest band fits approximately 85-110 cm chest circumference
• Shoulder buckle tabs add roughly 5 cm of additional adjustment range per side
• Best fit on shoulder widths 42-52 cm; very narrow shoulders may need extra padding
• One honest trade-off: pauldron plates are not removable — the armor look is permanent, not modular

Material and Care

The straps and panels are cut from smooth matte faux leather (PU-coated fabric) — no crinkle-finish, no glossy patent sheen. Silver-tone hardware is zinc alloy with a chrome-style plating. To clean, wipe with a damp cloth and mild soap, then air dry flat — do not machine wash or submerge, as prolonged soaking can delaminate the PU coating at panel edges.

• Body: smooth matte PU faux leather over woven fabric backing
• Hardware: zinc alloy with chrome-style plating (silver tone)
• Care: wipe clean with damp cloth, air dry — no machine washing or soaking
• Store flat or hanging to prevent creasing across the panel rivet lines

Styling for Costume and Nightlife

Worn over a bare chest, this harness works as a costume centerpiece for warrior, gladiator, or fantasy-themed events — the layered shoulder armor reads immediately from a distance without needing additional costume pieces. For nightlife or a festival outfit, pair with slim black trousers and boots; the O-ring detail at the chest adds a structural focal point without extra accessories. It also layers over a fitted black turtleneck for a dark-fantasy editorial look that photographs well under stage lighting.