Black Faux Leather Y-Back Harness with O-Ring

This black faux leather Y-back harness is built around a clean, structural silhouette: two shoulder straps split into a Y shape and converge at a solid silver O-ring at the chest, then a single vertical strap runs down to a second O-ring at the waist, secured by a flat horizontal band. The hardware is silver-tone riveted throughout, with lobster clasps at each shoulder for easy on and off.

Styling Over Outfits

Worn over a plain white or black fitted top, the Y-back geometry adds a layered, structured look without bulk. It sits flat enough to layer under an open blazer for an evening look, or wear it directly over a crop top for a festival or night-out outfit. The lobster clasps at the shoulders let you clip the harness onto bra straps or tank straps for extra stability.

• Layer over a bodysuit and high-waist trousers for a polished edge
• Wear over a fitted black turtleneck to highlight the O-ring detail at chest and waist
• Clip onto existing bra straps for a no-slip evening look

Sizing and Strap Fit

The shoulder straps and waist band are both adjustable via sliding rivet positions, accommodating bust circumferences roughly from 75 cm to 105 cm and torso lengths from approximately 38 cm to 50 cm. The flat straps are approximately 2 cm wide, which keeps the profile slim on most body types. Note that the waist horizontal band sits fixed at one position — it does not extend further, so those with a waist above 95 cm should measure before ordering.

• Shoulder straps: adjustable across multiple rivet positions
• Strap width: approximately 2 cm flat
• Recommended bust range: 75 cm to 105 cm
• Fixed waist band — not suited for waist above 95 cm

Material and Hardware Care

The straps are made from faux leather (PU) with a smooth matte-finish surface and no lining on the reverse side — the back of each strap is a raw PU backing. Hardware includes silver-tone lobster clasps, two O-rings, and dome-head rivets, all in a brushed silver finish. Wipe the faux leather surface with a dry or lightly damp cloth — do not soak or machine wash. Polish hardware with a dry cloth to prevent tarnishing. Store flat or hung to avoid permanent kinks in the straps.

• Body material: PU faux leather, smooth matte finish
• Hardware: silver-tone brushed metal lobster clasps and O-rings
• Fastening: dome-head rivets at all junction points
• Care: wipe clean only, no machine washing
• Storage: hang or lay flat to preserve strap shape

Everyday Wearability

Because the harness has no padding or lining, it stays lightweight and packs flat for travel. The Y-back configuration means no strap crossing the spine — useful for backless tops or low-back dresses worn underneath. The two O-ring focal points work as natural accessory anchors, and the overall weight is low enough for all-day wear without shoulder fatigue. One honest trade-off: the fixed-position rivets mean mid-wear size adjustments are not possible — set the fit before putting it on.