Piente
Chest Harness with Intersecting Straps & O-Rings
$52.35
Estimated Delivery Date: July 20-22
Color
Please select a color
Size
Please select a size
Discreet Shipping
Plain Packaging
No Content on Invoice
🚚 Discreet packaging — no brand name visible
⚡ Same day dispatch (orders before 2:00 PM)
🔒 256-bit SSL secure checkout
- SKU
- APFTM75-S1
- Barcode
- 7,46E+11
- Weight
- 0.200
- Categories
- Mens Harness
Product Details
| Care Instructions | Wipe clean with damp cloth; do not machine wash or submerge |
| Lining | Lightweight woven fabric bonded to strap underside |
| Closure | Adjustable metal buckles on shoulder and waist straps |
| Material | PU faux leather outer with fabric-bonded backing |
Related Searches
Frequently Asked Questions
The adjustable buckles accommodate chest circumferences from approximately 80 cm to 105 cm. Wearers above 110 cm should check full strap extension before ordering.
The O-rings are zinc alloy with a gold-tone plating, approximately 3 cm in diameter. They are not plastic but note the plating can wear on the high-contact points over time with heavy use.
Both work. The 1.5 cm strap width layers cleanly over sheer or mesh fabrics, and the crossing geometry stays visible through open-weave tops. Over thicker fabric the straps sit on the surface without sliding.
Wipe with a damp cloth after use. PU faux leather bonding can lift if the straps are soaked or placed in a washing machine, so avoid submersion and air-dry flat.
The wrist cuffs visible in the product image are a separate accessory. This listing covers the chest harness only — the intersecting strap frame with four O-rings and adjustable buckles.
Product Detail
Black faux leather chest harness with X-crossing straps and gold O-ring hardware for a bold layered look.
- ✓Four gold-tone zinc alloy O-rings, approx. 3 cm diameter at each crossing
- ✓Strap width approx. 1.5 cm, PU faux leather construction throughout
- ✓Chest fit range approx. 80-105 cm via adjustable shoulder buckles
- ✓Waist band adjustable approx. 65-95 cm for a secure lower anchor
- ✓Geometric X-cross strap layout covering sternum and mid-chest simultaneously
- ✓Wipe-clean care only — not suitable for machine washing or submersion
- ✓Pairs with open shirts or mesh tops for a layered daily-wear look
This black faux leather chest harness wraps the upper torso in a geometric X-cross strap pattern, anchored by four gold-tone O-rings at each intersection point. Unlike single-band styles, the intersecting layout distributes tension across the chest and waist simultaneously, giving a structured fit that stays in place during movement.
Strap Layout and Hardware
The harness runs two diagonal bands from each shoulder, crossing at the sternum and continuing down to a waist band, with a second horizontal chest band completing the frame. All connection points use gold-tone cast O-rings approximately 3 cm in diameter, threaded directly onto the straps for a seamless look. The strap width measures roughly 1.5 cm, narrow enough to layer over a tank or under an open shirt.
- Four gold-tone O-rings at strap intersections, approx. 3 cm diameter
- Strap width approx. 1.5 cm throughout the full harness
- Diagonal cross pattern from shoulders to waist band
- Horizontal chest band at mid-pectoral height
- Adjustable buckles on shoulder and waist straps
Sizing and Chest Fit
The harness fits chest circumferences from roughly 80 cm to 105 cm through the adjustable buckles on the shoulder straps and the waist band. Wearers with a chest under 80 cm may find the crossing geometry loose at the sternum; those over 110 cm should check strap extension before ordering. The waist band sits at the natural waist, approximately 10 cm below the navel, so a shorter torso shortens that gap.
- Chest range: approx. 80-105 cm with buckle adjustment
- Waist band adjustable from approx. 65-95 cm
- Best fit on torso length 45-55 cm (shoulder to navel)
- Not recommended for chest measurements above 110 cm
Styling and Occasion
Worn shirtless over jeans, the black straps and gold hardware read as a festival or rave accessory with minimal styling effort. For a layered daily look, open a sheer or mesh shirt over the harness so the crossing straps show through the fabric. On stage or at a themed party, the intersecting geometry photographs sharply under spotlights because the flat faux leather reflects light evenly without a high-gloss shine. The matching wrist cuffs shown in the product image are a separate item but coordinate directly with this harness set.
Material and Care
The straps are cut from PU faux leather bonded to a lightweight backing fabric, giving a firm hand without the cracking common to thinner PVC alternatives. Hardware is zinc alloy with a gold-tone plating. Wipe straps clean with a damp cloth; do not submerge in water or machine wash, as prolonged water contact can lift the bonding layer at the edges. Store flat or loosely rolled to prevent permanent creasing in the strap material.
- PU faux leather outer, fabric-bonded backing
- Zinc alloy gold-tone O-ring hardware
- Wipe clean only — no machine washing
- Store flat to avoid strap crease marks
WHAT OTHER PRODUCTS ARE AVAıLABLE in OUR OTHER CATEGORIES?
Chest Harness with Intersecting Straps & O-Rings
$52.35
