Collared Body Harness with Chain and Leg Straps

This black faux leather body harness set arrives as a 5-piece coordinated collection — a wide structured collar, a multi-strap waist belt approximately 8 cm tall, wrist cuffs, thigh bands, and a silver-tone chain linking collar to belt. Unlike single-strap cage harnesses, every piece in this set is cut from the same matte black faux leather, so they layer together without mismatched finishes.

Collar and Chain Detail

The wide collar sits roughly 5 cm above the collarbone, secured with silver stud hardware for a polished rather than rough look. A silver curb chain — approximately 40 cm long — drops from the collar clasp straight to a center O-ring on the waist belt, creating a vertical focal line down the torso. The chain is detachable at both ends, so you can wear the collar and belt as standalone pieces when a lower-key look is needed.

• Collar width approximately 5 cm, silver stud detailing along the edge
• Silver curb chain approximately 40 cm, detachable at collar and belt O-ring
• Waist belt features three parallel straps and a center O-ring in silver tone
• Hardware is silver-tone metal; no gold or brass mix in the set

Wrist Cuffs and Thigh Straps

Each wrist cuff is approximately 4 cm wide with a single O-ring and snap closure, worn stacked or alone over sleeves. The thigh bands sit at the upper thigh and mirror the collar construction — same stud spacing, same O-ring attachment point — giving the set a unified visual rhythm from neck to knee. Note that the leg straps do not connect to the waist belt with the included hardware; a separate garter attachment would be needed for that.

• Wrist cuffs approximately 4 cm wide, snap closure, O-ring attachment
• Thigh bands approximately 5 cm wide, adjustable with press-stud system
• All five pieces use matching silver-tone hardware throughout
• Thigh straps do not include a connector strap to waist belt — worn independently

How to Style This Set

Worn over a nude or blush long-sleeve bodysuit — as shown — the black straps read clearly against light fabric, a straightforward daily occasion or nightout combination. For a bolder look, layer the waist belt over a fitted black blazer and wide-leg trousers; the chain becomes the only visible metallic accent. The collar alone pairs with a plunge-neck top as a standalone neck accessory for daytime wear.

• Over a bodysuit: collar + chain + belt create a front-facing focal column
• Blazer styling: waist belt over tailored jacket for structured editorial look
• Partial wear: collar-only or belt-only for subtler everyday accessory use
• Monochrome: all five pieces over an all-black outfit for textural contrast

Sizing and Fit

The waist belt is designed for waist circumferences between 60 cm and 90 cm using the press-stud adjustment rows. The collar fits neck circumferences from approximately 32 cm to 42 cm. The wrist cuffs fit wrists from 15 cm to 20 cm. Thigh bands accommodate thighs from approximately 45 cm to 60 cm. If your measurements fall outside these ranges, particularly at the thigh, the stud rows may not provide enough adjustment — measure before ordering.

Material and Care

All straps are cut from matte-finish faux leather (PU-coated fabric) — vegan, no animal products. The backing is a woven textile that prevents stretching under tension. Hardware is silver-tone zinc alloy. Wipe clean with a damp cloth only; do not submerge in water or machine wash, as prolonged moisture weakens the PU bonding layer. Store flat or rolled loosely to avoid permanent crease marks in the faux leather surface.