Conical Cup Chest Harness with Silver Chain Straps

This chest harness pairs rigid conical faux leather cups with delicate silver link chain shoulder straps, creating a structured silhouette that sits closer to avant-garde fashion than to a conventional bralette. The vivid red body is assembled with silver rivets at each corner of the cups, and a narrow red band runs underneath, fastening at the back with an adjustable closure. A small silver O-ring sits front and center where the two cups meet the band, acting as the visual anchor of the piece.

Styling for Stage, Festival, and Night Out

The structured red cups read as a statement top when worn as an outer layer, so the harness works best over sheer mesh or under a sheer blouse left open. Two outfit directions that work well:

• Paired over a black mesh long-sleeve top with high-waist wide-leg trousers for a festival editorial look
• Worn under an open tailored blazer with no additional top, the chain straps visible across the shoulders
• Layered over a fitted red bodysuit so only the conical cups and chains show through an open-front jacket

Fit and Sizing Notes

The conical cups are pre-formed and non-adjustable in cup volume, so the fit depends primarily on the underbust band, which the rear closure lets you tighten or loosen within a roughly 60-90 cm underbust range. The chain shoulder straps hang from fixed points on each cup and do not adjust in length; they suit a torso length of approximately 40-48 cm shoulder to underbust. Women with a smaller ribcage will find the band sits more firmly; women above a 90 cm underbust should size up or expect the band to sit at its maximum extension. The rigid cup shape is not designed to provide support in the way a structured bra does.

Faux Leather Material and Care

The cups and band are cut from smooth matte faux leather (PU-coated fabric backing), which holds its shape without stiffeners because of the inherent rigidity of the material. The silver-tone hardware includes the chain links, rivets, and O-ring, all in a matching cool silver finish rather than gold or antique bronze. Because PU faux leather does not breathe, this piece is best for short wearing sessions rather than all-day use. Wipe the surface clean with a damp cloth only; do not submerge in water or machine wash, and keep away from direct heat, which can cause the PU coating to crack over time.

• Body: PU faux leather over woven fabric base
• Hardware: silver-tone alloy chain, rivets, and O-ring
• Care: wipe with damp cloth, air dry flat, store away from direct sunlight
• Trade-off: rigid pre-formed cups do not adapt to different cup volumes and offer no padding or support

Hardware and Construction Detail

Each conical cup is reinforced at its upper corners with two silver rivets that anchor the chain strap attachment points, distributing the chain's pull across the cup surface rather than a single seam. The O-ring at center front has a diameter of approximately 1.5 cm and is purely decorative, as the structural connection between the two cups is the band itself. The rear closure uses a hook-and-bar system hidden under the faux leather strap.