Faux Leather Full Body Cage Harness with O-Ring Design

This full body cage harness spans from shoulder to upper thigh in deep red faux leather straps approximately 1.5 cm wide, connected at key junctions by silver-tone metal O-rings and rivet studs. Unlike single-zone harnesses that cover only the chest or waist, this design layers across three distinct body sections — upper chest, mid-torso, and upper thigh — creating a structured cage silhouette without adding bulk between the straps.

Strap Construction and Hardware

The harness features a symmetrical strap layout: two shoulder straps converge at a central back point, three horizontal bands cross the chest and ribs, and a waist O-ring connects a lower cage section over the hips. Two separate leg bands sit at the upper thigh. Silver-tone O-rings appear at the waist center, hip sides, and thigh connectors, while small dome rivet studs reinforce every strap junction — reducing stress points that commonly cause cheaper harnesses to pull apart at the hardware.

• Strap width: approximately 1.5 cm throughout for even pressure distribution
• Seven O-rings total: waist center, two hip points, two thigh connectors, two upper chest
• Silver-tone dome rivets at every strap junction for structural reinforcement
• Adjustable buckle at the back shoulder strap for circumference sizing
• Leg bands sit at upper thigh, not mid-thigh — size up if thighs exceed 60 cm

Sizing and Fit

The harness is sized for a torso length of roughly 48-58 cm (measured from shoulder to hip crease) and a waist between 60 and 80 cm. The adjustable back buckle adds about 6 cm of range. Individuals with a waist over 82 cm or a torso under 46 cm may find the cage geometry shifts out of intended alignment. The leg bands are fixed-circumference; thighs up to approximately 60 cm fit comfortably without pinching.

• Recommended waist range: 60-80 cm (buckle adds up to 6 cm)
• Torso length suited to: 48-58 cm shoulder-to-hip
• Thigh band limit: comfortable up to approximately 60 cm thigh circumference
• Not recommended for torsos under 46 cm — cage straps may overlap awkwardly

Material and Care

Straps are made from faux leather (PU-coated fabric), which holds shape under repeated wear and resists surface cracking better than thin vinyl alternatives. The material is not breathable, so extended wear during warm weather may feel warm against skin. Hardware is silver-tone zinc alloy. To clean, wipe straps with a damp cloth and mild soap; avoid soaking or machine washing, which can soften the PU bond and cause peeling over time. Store flat or loosely rolled — folding at a sharp angle creases the faux leather.

• Material: PU faux leather on fabric backing
• Hardware: silver-tone zinc alloy O-rings and dome rivets
• Care: damp cloth wipe only — no machine wash, no soaking
• Storage: flat or loosely rolled to prevent crease marks

Styling and Occasion

Worn over a black mesh bodysuit, the red straps read as a graphic overlay against a dark base — a popular festival or editorial pairing. Layered over a fitted white shirt left unbuttoned, the harness becomes the visual anchor of a streetwear look. The thigh bands work best with high-waist shorts or a mini skirt that stops above the upper leg bands so the cage geometry stays visible. This is a statement layering piece rather than a standalone garment, so plan the base layer before purchase.