Full Body Cage Harness with Thigh Garters

This black faux leather full body cage harness wraps from the chest down to the thighs in a multi-strap cage silhouette. Approximately 1.5 cm wide straps create three horizontal bands across the torso, a central chest O-ring, and separate double-strap thigh garters that sit just above and below the mid-thigh. Unlike single-zone harnesses, this set covers the entire front of the body in one coordinated layered look.

Cage Strap Construction

The upper body section starts at the collarbone with a chest-spanning top strap connected to a central silver O-ring. Two additional horizontal straps wrap the ribcage and waist, secured by silver-tone rectangular buckles at each side. The waist band connects to a hip strap that anchors the thigh garter section below.

• 3 horizontal torso straps spaced roughly 8 cm apart for even coverage
• Central silver O-ring, approximately 3 cm diameter, at chest center
• Silver-tone metal buckles at every adjustment point
• All connecting hardware is smooth-edged pressed metal, not cast

Thigh Garter Fit

Each thigh garter consists of two parallel bands — one sitting at the upper thigh and one at mid-thigh — connected by a vertical strap on the outer leg and a small O-ring accent on the inner side. The garters are sized for thigh circumference roughly 45-65 cm; the buckle slides give about 15 cm of adjustment range. Wearers with thighs below 45 cm may find the lower band slips; those above 65 cm should measure carefully before ordering.

• Double-band design holds position without rolling
• Inner O-ring detail adds a symmetrical hardware accent
• Vertical outer connector keeps the two bands parallel during wear
• Adjustable at three points per leg

Styling and Occasion

Worn over a sheer bodysuit with high-waisted wide-leg trousers, the cage straps show clearly at the waist and hip cutouts for an editorial festival look. Alternatively, layer the top section over a structured black bralette and leave the thigh garters visible below a vinyl mini-skirt for a club-ready outfit. The all-black palette means no color-matching effort; the silver hardware reads as jewelry against both pale and dark base layers.

Material and Care

Straps are constructed from faux leather (PU coated fabric) with a smooth matte surface on the outer face and a fabric-backed interior for contact comfort. The hardware is silver-tone pressed metal. Do not machine wash — wipe straps with a damp cloth and mild soap, then air dry flat. Avoid prolonged exposure to direct sunlight, which can cause PU coating to crack over time. Store flat or loosely coiled, never folded at sharp angles, to preserve strap shape.