Full Body Harness with Adjustable Garter Straps & O-Rings

This black faux leather full body harness combines a structured chest band, a waist-cinching mid-section, and double-strap thigh garters into one wearable piece — making it distinctly different from single-zone harnesses that stop at the waist. The hardware is silver-tone, with O-rings at the hip connection points and small pin buckles on every adjustable strap.

Chest and Waist Strap Layout

Two horizontal bands cross the chest, connected by short vertical straps that run over the shoulders. Below, a single waist band anchors the O-rings from which the garter straps descend. The chest straps sit approximately 1.5 cm wide, wide enough to stay visible over a bodysuit or bralette without digging in. Shoulder straps are also adjustable, making the torso fit customizable across a range of proportions.

• Double chest bands with shoulder strap connection — no single-point slip risk
• Center waist ring acts as the structural anchor for garter attachment
• Pin buckles at shoulder and waist allow independent length adjustment

Garter Strap Design and Thigh Fit

Each leg features two parallel black straps that wrap the upper thigh and fasten with their own silver pin buckles, forming a double-band cuff effect. The O-ring hardware at the outer thigh is purely structural — it connects the descending garter strap to the thigh cuff. This design keeps the garters secure during movement, unlike single-strap versions that rotate. The thigh bands fit most upper thigh circumferences between 45 cm and 62 cm; sizing up in strap length is recommended for thighs above 58 cm.

• Double-strap thigh cuffs stay flat and do not twist with movement
• Silver O-ring connector at outer thigh on each leg
• Adjustable pin buckle on each thigh band — fits 45-62 cm upper thigh
• Garter drop length adjustable between approximately 20 cm and 28 cm from waist ring

How to Style and Wear

The most direct pairing is over a white or nude bodysuit, exactly as shown — the black straps read clearly against a light base and the look works as an everyday bold-fashion layer. For a club or festival outfit, wear over a mesh or sheer top with high-waisted shorts; the thigh garters add structure to the lower half without requiring stockings. The harness also layers over a fitted blazer for an avant-garde editorial look. Note: the harness is designed to be worn over garments, not against bare skin as a standalone top — the chest bands are too narrow to function as a bralette on their own.

Sizing and Fit Notes

The chest bands adjust to fit bust measurements from approximately 75 cm to 100 cm. The shoulder straps extend to accommodate torso lengths from roughly 38 cm to 48 cm (nape to waist). Women with shorter torsos may find the waist O-ring sits slightly above the natural waist; this is a common fit note for full-body styles. Tall wearers (above 175 cm) should check that the garter drop length reaches the intended thigh position — the maximum drop of ~28 cm may feel short on very long torsos.

Material and Care

Straps are made from faux leather (PU) over a flexible inner core, giving them structure without the stiffness of stiff bonded leather. Hardware is zinc-alloy silver-tone. There is no lining on the straps — the inner face is smooth PU. To clean, wipe with a slightly damp cloth and dry immediately; do not submerge or machine wash. Avoid prolonged contact with oils or alcohol-based products, which can cause PU surface cracking over time.

• Faux leather (PU) strap material — vegan-friendly
• Zinc-alloy silver-tone O-rings and pin buckles
• Wipe-clean only — no machine washing
• No fabric lining on straps; smooth PU inner surface