Full Body Harness with Criss-Cross Waist Straps & O-Rings

This black faux leather full body harness is built around a dual criss-cross waist band that cinches and layers across the torso, connected at the center by a silver O-ring. Two shoulder straps form a V-shape from the chest connector up over the shoulders, with each strap threaded through a rectangular silver buckle for a precise, repeatable fit. The waist section uses two overlapping horizontal bands that cross at the front, secured to the hip frame with additional silver O-rings and rivet hardware — a construction detail that separates it from single-band alternatives.

Styling for Everyday Outfits

Worn over a fitted white T-shirt, the black straps create strong geometric contrast against a neutral base — a practical daytime combination that reads as fashion accessory. Over a sleeveless turtleneck bodysuit it functions as a structured outer layer for evening. The criss-cross waist bands sit naturally over high-waisted trousers or midi skirts, framing the waist without disappearing into the silhouette.

• Layer over a long-sleeve fitted top for a complete covered-shoulder look
• Wear on bare skin under an open blazer for a fashion-forward editorial style
• Pair with wide-leg trousers — the horizontal waist straps echo the relaxed volume
• Works with both casual denim and tailored suiting as a contrast accessory

Sizing and Fit Range

The shoulder straps are individually adjustable from approximately 30 cm to 55 cm per side, accommodating torso lengths from XS through L. The waist bands extend from roughly 60 cm to 90 cm in circumference, fitting most EU 34-44 frames. The overlapping criss-cross design adds some visual volume at the waist, which may not suit wearers seeking a slimming effect; those between size L and XL should measure waist circumference before ordering.

• Shoulder strap adjustable range: approximately 30 cm to 55 cm per strap
• Waist band circumference: approximately 60 cm to 90 cm
• Fits EU sizes 34-44 comfortably; XL and above may find waist band too snug
• Strap width: approximately 1.5 cm throughout the body and waist sections

Faux Leather Material and Care

The straps are cut from smooth-finish faux leather — a PU-coated fabric that resists surface scratches better than matte bonded alternatives and holds its black color without fading after multiple wears. All metal hardware is silver-tone with a brushed finish; rivets are set flush so they do not catch on fabric. Avoid soaking in water — wipe the straps clean with a slightly damp cloth and allow to air dry flat. Do not machine wash or tumble dry, as heat degrades the PU coating.

• Material: smooth PU faux leather, approximately 1.5 cm wide straps throughout
• Hardware: silver-tone brushed rectangular buckles and O-rings
• Care: wipe-clean only with a damp cloth; do not submerge or machine wash
• Trade-off: PU faux leather is less breathable than fabric harnesses for extended wear in warm conditions