Full Body Harness with Detachable O-Ring Chain

This black faux leather full body harness spans from a halter neck collar down to X-cross hip straps, connected by a vertical center spine with three silver O-rings positioned at chest, waist, and hip. The detachable chain clips onto any O-ring, letting you switch the focal point for different outfits without buying a new piece.

Strap Layout and Hardware

Four horizontal bands — collar, chest, waist, and hip — are joined by the center spine, creating a structured cage silhouette over any bodysuit or sheer top. Each band uses a flat 2.5 cm wide faux leather strap with silver-tone metal buckles at the sides for width adjustment. The O-rings measure approximately 2 cm in diameter and are stitched into the spine at fixed intervals rather than floating, so they stay centered during wear.

• Three fixed silver O-rings along the vertical spine at chest, waist, and hip
• Silver-tone metal side buckles on every horizontal band
• X-cross thigh straps that sit across the hip crease for a low-cut layering effect
• Detachable chain accessory clips to any O-ring for a customizable focal point
• Flat 2.5 cm straps reduce pressure points compared to narrower cord-style harnesses

How to Style for Different Occasions

Worn over a longline black blazer with no shirt underneath, the chest band and center spine create a structured editorial silhouette for a night-out or fashion event. For daily street wear, layer the harness over a white fitted turtleneck — the black-on-white contrast keeps the look graphic without being costume-like. The X-cross hip straps show best over high-rise straight-leg trousers rather than low-rise jeans, where they frame the waist cleanly. Remove the chain for a minimalist cage look; clip it at the waist O-ring for an accent belt effect.

• Over a white turtleneck bodysuit for everyday edgy layering
• Over a sheer mesh top for festival or editorial photography
• Worn solo over skin-tone underlayer for a sculptural avant-garde look
• Chain clipped at chest O-ring to draw attention upward in stage or performance outfits

Sizing and Fit Notes

The harness adjusts via the side buckles on each horizontal band. The chest band fits ribcage circumferences from approximately 70 cm to 100 cm; the waist band covers 60 cm to 90 cm. The collar loop is not adjustable — it sits as a fixed halter neck, so it works best on neck circumferences under 38 cm. The X-cross hip straps are fixed-length and designed for hip widths between 80 cm and 105 cm. This harness is not intended as shapewear and does not compress the torso; it sits on top of the body rather than cinching it.

Material and Care

The straps are cut from matte black faux leather (PU-coated fabric backing), which holds its shape without stretching and wipes clean more easily than genuine leather. The lining layer against the skin is a thin woven fabric that reduces sliding on smooth fabrics like satin or silk. Metal hardware is zinc-alloy with a silver-tone electroplate finish — avoid prolonged moisture contact to prevent tarnishing. Hand wash gently in cold water with mild soap if needed; do not machine wash or tumble dry. Lay flat to air-dry away from direct sunlight to prevent the PU surface from cracking. Store unfolded or loosely rolled to maintain strap flatness.