Full Body Harness with Halter Choker and Garter Straps

This black faux leather full body harness connects a fitted halter-style choker collar to a structured multi-strap cage bodice and then extends into four adjustable garter straps with silver metal clips — all in a single wearable piece. The choker sits snugly around the neck without restricting movement, while the horizontal chest straps create a defined grid pattern across the torso.

Chest Strap Construction

The bodice section consists of five horizontal faux leather bands riveted at equal intervals, forming a cage-style chest frame roughly 28 cm tall from collar base to waist band. Silver-tone metal rivets and D-rings anchor every junction point, keeping the strap configuration stable during wear. The straps sit flat against the skin without bunching, though wearers with a very full bust above 100 cm may find the spacing tighter than expected.

• Five horizontal chest straps with silver rivet hardware at each crossing point
• Fitted halter choker approximately 3 cm wide, closes at the back with an adjustable buckle
• Waist band anchors the lower cage section and garter attachment points
• All metal hardware is silver-toned zinc alloy — not gold or rose gold

Garter Strap Details

Four garter straps drop from the hip band, each fitted with a classic silver metal suspender clip at the lower end. Each strap adjusts via a small slide buckle, accommodating thigh-highs or stockings up to approximately 70 cm thigh circumference. The garter straps are roughly 25 cm in their shortest adjusted length and extend to about 40 cm — suitable for most mid-to-tall heights when worn at the natural waist.

• Four adjustable garter straps with functional silver metal clip ends
• Strap length adjustable from approximately 25 cm to 40 cm
• Compatible with standard thigh-high stockings and hold-ups
• Straps are removable at the hip band if garter function is not needed

Sizing and Fit

The harness is designed for a torso length of roughly 40-50 cm (measured from nape to natural waist). The chest straps include adjustment buckles that allow a range of approximately 60-90 cm bust circumference and 60-85 cm waist circumference. Wearers below 155 cm or above 180 cm in height may find the vertical spacing between straps sits off-center. The choker collar fits neck circumferences of 32-42 cm — it is not suitable for neck sizes above 44 cm.

Material and Care

All straps are cut from smooth faux leather (PU-coated synthetic fabric), giving a glossy black surface similar in appearance to genuine leather at a lighter weight. The material is approximately 2 mm thick, which adds visible body to the straps without excess stiffness. Wipe clean with a damp cloth — do not submerge in water or machine wash. Store flat or loosely rolled to avoid permanent creasing in the PU surface. The faux leather can stiffen slightly in cold temperatures, so allow the piece to warm to room temperature before wearing in winter.

• PU faux leather, approximately 2 mm strap thickness
• Glossy black finish; no lining (straps rest directly on skin)
• Wipe clean only — no machine washing or soaking
• Store flat or loosely coiled to prevent surface cracking

Styling and Occasions

Worn over an oversized white button-down shirt (left open) with straight-leg trousers, the harness adds visual structure as an everyday layering accessory. For evening wear, pair it over a simple black bodysuit or a sheer mesh top — the cage bodice sits visibly over outerwear for a gothic-adjacent festival or club look. The garter straps work equally well clipped to thigh-highs under a mini skirt or left visible outside an open-front coat. Because the piece is a single structured unit, it takes about 90 seconds to put on once you learn the buckle sequence — faster than multi-piece harness sets.