Full Body Harness with Strappy Diamond Design

This full body harness features flat black faux leather straps arranged in a geometric diamond pattern that spans from a choker collar down through the chest, waist, and hip bands. Unlike single-zone harnesses, the strap layout creates a continuous visual frame across the entire torso using precisely positioned silver O-ring connectors at every intersection.

Diamond Strap Configuration

The harness opens at the neck with a stand-up collar band approximately 2 cm wide, then branches into two chest straps that converge toward the center before fanning out into the large diamond shape covering the mid-torso. Additional cross-bands at the waist and hip level complete the geometric frame.

• Collar band with front center O-ring connector, sits at the base of the neck
• V-shaped chest straps descend from collar to meet the diamond apex
• Central diamond strap structure spans roughly 28-32 cm vertically on a medium frame
• Horizontal hip bands extend to the sides with silver O-ring end anchors
• All strap intersections reinforced with silver-tone metal O-rings, not simple stitching

Sizing and Fit

The harness is designed to overlay fitted garments or be worn against the skin, and the adjustable buckle closures allow the chest and hip straps to accommodate a bust range of approximately 80-105 cm and hip range of 88-116 cm. The collar fits neck circumferences between 33-42 cm. Note that the waist diamond sits best on torsos between 60-90 cm — on a larger waist the diamond proportions will appear wider and the angular geometry will be less pronounced.

• Adjustable chest straps fit bust 80-105 cm
• Hip bands adjust to accommodate hips 88-116 cm
• Collar band fits neck 33-42 cm circumference
• Recommended for torso length (shoulder to hip) 50-65 cm for optimal diamond placement
• Not suitable for extremely petite frames under 155 cm height — collar and hip bands may overlap

Material and Care

The straps are cut from smooth-finish vegan faux leather approximately 1.5 cm wide throughout, with no visible stitching on the outer face — the clean edge gives a sleek, uninterrupted line. The O-rings are silver-tone zinc alloy hardware. Because the material is faux leather, it should be wiped clean with a slightly damp cloth rather than submerged in water; avoid prolonged exposure to heat or direct sunlight to prevent the surface from cracking over time.

• Strap material: smooth vegan faux leather, approximately 1.5 cm strap width
• Hardware: silver-tone zinc alloy O-rings at all intersections
• No lining on straps — flat cut construction
• Wipe clean with damp cloth only; do not machine wash or soak
• Store flat or loosely rolled to avoid permanent crease marks on the faux leather surface

Styling and Occasion

The black-on-black or black-over-white contrast makes this harness versatile for both everyday bold fashion and event styling. For a daytime urban look, layer it over a fitted white ribbed turtleneck and high-waist trousers so the diamond frame sits as a structured accessory visible at the waist. For evening wear, wear it over a black slip dress or bodysuit so the geometric strap overlay adds dimension without competing colors. Because the diamond shape draws a vertical line down the center of the torso, it works well as a body-lengthening detail on midi-length outfits.