Full Body O-Ring Harness with Integrated Garter Straps

This black faux leather full body harness runs from a fitted collar to dual thigh bands, connecting through five silver O-rings at the chest, waist, and hip junction. Unlike single-zone harnesses, the built-in garter straps extend past the hips to wrap the upper thighs, creating a continuous vertical line from neck to leg.

Chest and Waist Strap Layout

Two V-shaped chest straps meet at a central O-ring positioned just below the sternum, while a horizontal waist band sits approximately 2-3 cm above the natural waist. The cross-body geometry stays flat against the torso without bunching, even over fitted tops or bodysuits.

• Collar strap width: approximately 1 cm, sits flat at the base of the neck
• Chest V-straps: two diagonal bands converging at one central O-ring
• Waist band: single horizontal strap, silver buckle closure on the back
• Hip junction: three-point O-ring where waist band meets garter leads

Integrated Garter Straps

Two garter straps drop from the hip O-ring and loop around each upper thigh, held in place by a small silver O-ring at the outer thigh. The loop diameter adjusts via slider buckles to fit thigh circumferences from roughly 48 cm to 62 cm. The straps are not designed to attach stockings — they function purely as decorative thigh framing, which is worth noting if you are looking for functional garter clips.

• Garter strap count: two (one per thigh)
• Thigh loop adjustment: slider buckle, range approximately 48-62 cm circumference
• O-ring at thigh: 2.5 cm diameter silver-tone metal
• No stocking attachment clips included

Sizing and Fit

The harness is designed to layer over clothing or lingerie. Length from collar to hip O-ring is approximately 50-55 cm, fitting torso lengths typical of sizes XS through M. Taller wearers or those with longer torsos (above 56 cm neck-to-hip) may find the waist band sits lower than intended. All straps use standard slider adjusters — no tools required to resize.

• Recommended torso length: 45-55 cm (neck base to natural waist)
• Chest adjustment: each chest strap has one slider, range roughly 30-50 cm arc length
• Not recommended for torso lengths above 56 cm without modification
• Fits over outfits up to approximately 5 mm fabric thickness

Material and Care

Straps are constructed from faux leather (PU) with a smooth matte surface that resists light creasing. Hardware is silver-tone zinc alloy. To clean, wipe straps with a damp cloth and mild soap — do not submerge in water or machine wash, as prolonged moisture weakens the PU laminate at the stitch points. Store flat or loosely coiled to prevent permanent kinks in the strap material.

• Strap material: PU faux leather, matte smooth finish
• Hardware: silver-tone zinc alloy O-rings and sliders
• Care: wipe-clean only, no machine wash, no tumble dry
• Storage: flat or loose coil to preserve strap shape