Metal Studded Faux Leather Harness Bralette

This black faux leather harness bralette is built around a flat-strap cage frame — two halter-neck straps converge into a central V that anchors three horizontal underbust bands, each joined by silver metal studs rather than stitching. The open cup structure means it sits on the torso as a shaped accessory rather than a supportive garment, so layering choices matter.

Cage Structure and Strap Detail

The bralette uses approximately 1.5 cm wide flat faux leather straps throughout — wide enough to hold shape but narrow enough to sit flat under a sheer top or open blazer. The halter tie fastens at the back of the neck, while the three horizontal cage bands close at the back with an adjustable buckle. Silver-tone rivets secure every junction point, adding a structured edge without excess hardware weight.

• Halter-neck ties fasten at back of neck for a clean shoulder line
• Three horizontal cage bands frame the underbust and lower ribcage
• Silver stud rivets at all strap intersections — no loose rings or chains
• Matte black finish on faux leather resists surface shine under stage or club lighting
• No underwire, no cups — purely a cage silhouette accessory

Styling and Occasion Options

Wear this cage bralette as the visible layer over a fitted black turtleneck for a structured editorial look, or let the halter straps show above a low-cut blazer at a concert or night out. The geometric frame also works over a mesh bodysuit for a layered texture contrast. Because the design has no cups and no support padding, it functions as outerwear or a top layer rather than everyday underwear — plan accordingly when building your outfit.

• Over a mesh bodysuit: cage straps visible, ribcage bands add geometry
• Under an open blazer: halter strap at neck creates a deep V focal point
• Festival or club wear paired with high-waist trousers or a midi skirt

Sizing and Fit Details

The halter neck ties allow approximately 10-15 cm of adjustment in effective length, which accommodates torso heights from roughly 155 cm to 175 cm. The three horizontal bands span a ribcage circumference of around 70-90 cm on the standard size — measure your underbust before ordering. The faux leather straps have minimal stretch, so this fits best when your ribcage measurement lands at the mid-point of that range; if you are at the upper edge, the bands will sit snug against the ribs without much give. This design is not suitable for use as a primary bra — it provides no bust support.

Material and Care

The straps are made from faux leather (PU coated fabric) with a matte surface finish. Hardware is silver-tone metal alloy. Because PU material can crack if soaked or machine washed, the recommended care method is a damp cloth wipe only — no submerging, no machine wash, no tumble dry. Store flat or loosely rolled to avoid permanent crease marks on the strap surface. The rivets are pressed in, not glued, so they are durable under normal fashion-wear stress but not under sustained tension or repeated stretching.