Siyah Kadın Kemer Boyun Detaylı Metal Halka Aksesuarı

The Minimalist O-Ring Neck to Underbust Harness is built on a single vertical spine of approximately 1.5 cm wide black faux leather straps that runs from a flat collar band down to an underbust band, held together by three evenly spaced silver-tone O-rings. Where most harnesses spread across the chest with multiple crossing straps, this one keeps the geometry to a strict front-facing column — the collar sits just above the collarbone, the lowest O-ring lands at the natural underbust, and there is no back hardware at all.

Collar and Underbust Construction

The neck collar is a closed, non-adjustable band reinforced at the front triangle junction with a riveted seam. Two slim faux leather strips fan out from the lowest O-ring to form the underbust band, each riveted at three points for durability. The hardware throughout is silver-tone metal O-rings — three on the front spine and one at each underbust wing tip — giving a total of five ring details visible from the front.

• Three front-spine O-rings spaced roughly 7-8 cm apart for even visual rhythm
• Collar band sits flat against the neck with no loose ends or buckle bulk
• Underbust wings extend approximately 18-20 cm each side from center ring
• All junctions reinforced with silver-tone metal rivets, not just stitching
• No back straps — piece rests entirely at the front torso

Styling and Occasion

The narrow black straps layer cleanly over a fitted white shirt without adding visual clutter — the vertical O-ring line reads as a structured jewelry piece rather than outerwear. For a street-style approach, wear over a long-sleeve ribbed top with high-waisted trousers; the underbust band sits at the waist seam and adds a defined horizontal break. Over an open blazer, only the collar and top O-ring show above the lapels, which works for evening wear without looking costume-heavy.

• Over fitted white or black shirt for a daily fashion-forward look
• Layered under an open blazer for evening or concert styling
• Worn directly on skin over trousers for a bold editorial outfit
• Pairs with high-waisted skirts where the underbust band doubles as a waist accent

Sizing and Fit

The collar is fixed-size with no adjustable closure — it slides over the head and sits at the base of the neck. It fits most adult neck circumferences up to approximately 38 cm; those with larger necks may find the collar tight. The underbust band accommodates underbust measurements of roughly 65-90 cm due to the slight stretch in the faux leather and the open wing design. This piece is not recommended for cup sizes above D because the vertical strap runs between the cups rather than supporting them — the harness is purely decorative and provides zero lift or support.

Material and Care

The straps are constructed from smooth black faux leather (PU) over a thin fabric backing, giving each strap a slight flexibility without curling. The O-rings and rivets are silver-tone zinc alloy; these are not rustproof for long-term water exposure. To clean, wipe with a dry or slightly damp cloth — do not submerge in water, do not tumble dry, and keep away from direct heat sources such as radiators, which can cause the PU surface to crack over time. Store flat or loosely coiled to prevent permanent crease lines in the straps.