O-Ring Choker with Multi-Layered Chain Necklace

This black faux leather choker pairs a wide band with a front-centered silver O-ring and three separate black chain strands that cascade from choker length down to mid-chest — all sold as a single coordinated set. The band sits approximately 3 cm wide at the neck, secured by two silver snap studs, while the chains vary from a short 38 cm loop to a longer 60 cm figaro-style strand.

Chain Layers and Hardware

The multi-layer design uses three distinct chain types so each strand catches light differently. The shortest rests just below the choker band at approximately 38 cm, the mid-length curb chain sits at roughly 48 cm, and the longest figaro chain extends to about 60 cm — landing near the sternum on most wearers. All metal components are finished in matte black with silver O-ring hardware at the choker front.

• Three chain strands at 38 cm, 48 cm, and 60 cm lengths
• Silver-tone O-ring centered on the faux leather band
• Snap-stud closure on a 3 cm wide faux leather band
• Matte black chain finish throughout

Sizing and Fit

The choker band adjusts to fit necks between 30 cm and 40 cm in circumference via its snap closure. Wearers with a neck circumference above 40 cm will find the band too snug. The chains hang freely and do not add pressure, so fit depends entirely on the choker band measurement.

• Choker band fits necks 30-40 cm in circumference
• Not suitable for neck circumference above 40 cm
• Chains hang loose — no adjustable length on the chain strands
• Snap closure allows two or three fit positions

Styling with Everyday Outfits

The necklace layers work well over a plain white or black crew-neck T-shirt — as shown in the product image with a striped tee — where the chain contrast reads clearly. For a more dressed-up approach, layer it over a black turtleneck for a gothic-influenced evening look, or wear it with a denim jacket left open to let the longest chain rest against the chest. The piece is sized for daily wear, not costumes, so the hardware is lightweight enough for a full day without neck fatigue.

Material and Care

The band is constructed from faux leather (PU) with no fabric lining — the inside surface is smooth PU. Chain components are zinc alloy with a matte black electroplated finish. Do not submerge in water — the electroplated finish on the chains can dull with prolonged moisture exposure. Wipe the faux leather band with a dry cloth; store flat or hanging to prevent chain tangling.

• Band: faux leather (PU), approximately 3 cm wide
• Chains: zinc alloy, matte black electroplated finish
• Hardware: silver-tone zinc alloy O-ring and snap studs
• Care: dry wipe only, avoid moisture and prolonged sun exposure