Red Cage Harness Set with Full Body Straps

This red faux leather harness set covers three zones at once: a grid-pattern cage bust built from five horizontal straps crossing two diagonal supports, a waist encirclement band sitting roughly 2-3 cm above the navel, and a pair of thigh garter frames that each carry four horizontal strap rows fastened with silver metal studs and O-rings. The result is a single wearable piece that layers visually rather than requiring separate accessories.

Chest Cage Construction

The bust section forms a triangular web that descends from the shoulder straps to a central silver O-ring at the sternum. Flat straps approximately 1.5 cm wide cross each other at fixed stud points, creating a rigid cage shape that holds its geometry without underwire or boning. This structured form sits flat on the chest rather than cupping, so it works best layered over a bralette or bodysuit rather than worn alone for coverage.

• Five horizontal chest straps connected by two diagonal side rails
• Central silver O-ring at sternum — approximately 2 cm diameter
• Stud spacing roughly 6-7 cm, creating a uniform grid pattern
• Shoulder straps connect directly to the cage without adjustment sliders on the bust section
• Not underwired — cage shape is maintained by strap geometry only

Waist and Leg Garter Frames

A continuous waist belt about 2 cm wide wraps the torso and anchors two drop straps that feed into the thigh garter sections. Each leg frame holds four horizontal straps connected by vertical side rails with silver studs, mirroring the chest cage aesthetic on the upper thigh. The garters end above the knee and are not designed to hold stockings — they function as decorative leg frames.

• Waist band width approximately 2 cm, with two silver side O-rings
• Two vertical drop straps link waist to each thigh section
• Four horizontal thigh straps per leg, spaced roughly 2 cm apart
• Silver stud hardware throughout — no gold or mixed-metal finish
• Thigh frames sit on the upper leg; they do not reach below mid-thigh

Sizing and Fit Notes

The set is sized for a standard adult torso; the waist belt accommodates roughly 60-80 cm circumference via buckle adjustment. The chest cage shoulder width is fixed, fitting shoulder widths up to approximately 38 cm — broader shoulders may find the cage shifts outward. Thigh garters include one adjustment point per strap, covering thigh circumferences of approximately 45-58 cm. The set photographs best on slimmer frames because the horizontal strap spacing is optimised for a 60-65 cm waist baseline.

• Waist belt adjustable: approximately 60-80 cm circumference range
• Thigh garter range: approximately 45-58 cm per thigh
• Shoulder width fits up to approximately 38 cm — check before ordering larger sizes
• One honest trade-off: strap tension is fixed at stud points, not sliding, limiting micro-adjustment

Material and Care

Straps are cut from faux leather (PU material), which gives the firm, slightly glossy finish visible in the image. Hardware is silver-tone metal — studs and O-rings. PU faux leather should be wiped with a damp cloth only; do not submerge in water or machine wash, as soaking degrades the PU coating. Store flat or loosely coiled — avoid tight folding at stud points to prevent cracking around the hardware holes. The red dye is surface-applied; keep away from pale fabrics during first wear to prevent color transfer.