Red Faux Leather Body Harness with O-Ring Choker and Chains

This red faux leather body harness pairs a wide collar-style O-ring choker with diagonal chest straps and silver chain links that drop down to a fully adjustable waist belt — three structural zones in one wearable piece. Unlike simpler strap designs, the silver chain connectors between the chest cross-straps and the waist band add both visual weight and an industrial edge that reads clearly over a fitted bodysuit or under a sheer blouse.

Chest Straps and Chain Detail

The harness runs two diagonal red faux leather straps across the chest, secured at the sides with silver metal buckles and rivets. Below those, silver chain links — each link approximately 1.5 cm wide — bridge the gap to the waist belt, creating a framed window effect at the midriff. The chain is not decorative-only; it carries structural tension when the waist belt is fastened, so the whole piece stays flat against the body during movement.

• Wide choker collar with central silver O-ring, approximately 3.5 cm band width
• Two diagonal chest straps with silver rivet hardware at cross points
• Silver chain connectors linking chest frame to waist belt
• Adjustable waist belt with multiple buckle positions, fits approximately 60-90 cm waist
• All hardware is silver-tone metal — no gold or rose-gold mixing

How to Style This Harness

Worn over a black or white fitted long-sleeve top, the red straps and silver chains form a strong graphic contrast suited to concerts, festival daywear, or editorial shoots. For a nightout look, layer it over a low-cut bodysuit so the O-ring choker sits at the collarbone — the chains then frame the waist above high-waisted trousers. One trade-off: the wide choker sits high on the neck, so very high necklines will partially hide the O-ring hardware.

• Over a fitted turtleneck for a layered, editorial street-style outfit
• Directly over skin or a bodysuit for a festival or nightclub look
• Paired with a blazer left open to let the red straps show at the neckline

Sizing and Fit Notes

The waist belt accommodates a 60-90 cm waist circumference via its multi-hole buckle system. The chest straps are fixed-width at approximately 1 cm and span the torso vertically, so the fit is most flattering on a torso length of 40-50 cm from collarbone to natural waist. Buyers with a very long torso (above 52 cm) may find the chain section sits lower than the waist. The choker fits neck circumferences of approximately 32-40 cm.

Material and Care

The straps are cut from smooth red faux leather (PU-coated polyester) with a slight gloss finish — no texture grain, giving it a clean modern look rather than a distressed aesthetic. Hardware is silver-tone zinc alloy. To maintain the surface, wipe with a dry or slightly damp cloth only; avoid submerging in water or machine washing, as moisture can separate the PU coating at stress points near the buckles. Store flat or hanging to prevent strap creasing.

• Faux leather (PU polyester) straps — smooth gloss finish, approximately 1 cm wide
• Silver-tone zinc alloy hardware — O-ring, buckles, chain links, rivets
• Spot clean only with a dry cloth; no machine wash
• Store flat or on a hanger to avoid permanent crease marks