Red Faux Leather Cage Harness with Choker and Thigh Straps

This three-piece cage harness is built from smooth, glossy red vegan leather and connects a fitted choker collar, a wide sculpted chest panel, and a pair of double thigh bands into one wearable unit. Unlike single-strap body harnesses, the broad chest section creates defined coverage across the bust while the dual horizontal thigh bands frame the upper legs for a structured, cage-like silhouette.

Chest Panel and Choker Design

The choker sits flat against the neck and features a centered silver-tone O-ring at the front, with a vertical strap descending to the chest panel. The chest section spans roughly 28-32 cm across to cover the bust area with solid vegan leather rather than individual straps, making it suitable for layering over a bodysuit or wearing as a statement top under a blazer. The O-ring detail doubles as a functional attachment point.

• Flat choker collar approximately 3 cm wide with O-ring hardware
• Vertical connecting strap links collar to chest panel without twisting
• Wide chest panel replaces the typical strap cage over the bust
• Silver-tone rivets and buckles throughout for consistent hardware finish

Waist and Thigh Strap Configuration

Below the chest panel, an adjustable waist belt with a rectangular silver buckle cinches the midriff. Side D-rings connect the waist belt to the two horizontal thigh bands, which wrap around both upper thighs at approximately 5 cm spacing. The thigh bands use slide-adjuster hardware, so the fit can be tuned independently for each leg. One honest trade-off: the thigh bands are designed for thighs up to approximately 60 cm in circumference — wearers above that measurement may find the bands sit higher than intended.

• Adjustable waist belt fits approximately 60-90 cm waist circumference
• Double thigh bands, each approximately 2.5 cm wide, fit up to 60 cm thigh
• Independent slide adjusters on each thigh band for asymmetric fitting
• D-ring connectors at hips link waist and thigh sections securely

Styling and Occasion

The red colorway pairs directly with black high-waist trousers and a white button-down for a festival or editorial look — the chest panel shows above an open shirt without layering complexity. For an evening-out combination, wear over a red or black slip dress with silver hoop earrings to echo the gunmetal hardware. The cage structure also works flat over a long-sleeve mesh top for colder-weather events without losing the visual impact of the strap geometry.

Sizing and Fit Notes

The harness is sized as a single adjustable piece. The choker adjusts between approximately 32-40 cm neck circumference; the chest panel suits a 75B to 90C bra sizing range based on the panel width. Wearers with a bust larger than 90C or a thigh above 60 cm should size up or contact support before ordering, as the panel may not provide full coverage and the thigh bands may sit awkwardly high.

Material and Care

The straps and panels are cut from PU vegan leather bonded to a textile backing — giving the glossy, smooth surface visible in the product imagery. Hardware is zinc-alloy with a silver-tone finish. Do not machine wash or submerge in water; wipe clean with a damp cloth and allow to air dry flat. Avoid prolonged direct sunlight, which can cause the red pigment to fade over time. Store folded loosely rather than hanging to prevent permanent crease lines in the chest panel.