Red Faux Leather Fringe Body Harness with High Neck

This red faux leather fringe body harness attaches at a high turtleneck collar and releases into hundreds of narrow vertical fringe strips that fall from chest to approximately mid-thigh — roughly 60-65 cm of coverage from neckline to fringe tip. A thin integrated waist belt gathers and cinches the fringe at the midsection, creating a defined silhouette without additional hardware.

Fringe Coverage and Construction

The fringes are cut from the same red vegan leather sheet as the collar, so the color is completely consistent across the entire piece. Each fringe strip is approximately 0.5-0.8 cm wide, giving the garment noticeable weight and movement. The density of the fringe means the piece works best as a statement overlay rather than a standalone top — the open construction leaves the torso largely visible.

• Approximately 60-65 cm total fringe length from collar to tip
• Individual fringe strips approximately 0.5-0.8 cm wide
• Integrated waist belt cinches at natural waist, approximately 65-90 cm adjustable
• High neck collar sits at throat level — approximately 3-4 cm collar band
• No metal hardware on fringe — all-faux-leather construction

How to Style This Piece

The image shows the harness layered over white fitted leggings and white heels, which lets the red fringe read as the hero element against a clean base. For a night-out look, try it over a fitted black bodysuit and straight-leg trousers, where the fringe hits the thigh line and creates movement with every step. For a concert or festival context, pair it over a cropped longline bralette and high-waist shorts — the fringe covers the midriff gap and acts as a dramatic overlay. Because the collar is a true high neck, the piece does not require a backup top for neckline coverage, but it does require a base layer beneath for modesty.

• Over white fitted leggings for a high-contrast editorial look
• Layered over a black bodysuit and trousers for evening occasions
• As a festival overlay on cropped tops and high-waist shorts

Sizing and Fit Notes

The harness fits a bust range of approximately 80-100 cm and the waist belt is suitable for waists approximately 65-90 cm. The high neck collar is not adjustable — it slips over the head and sits snugly at the throat, so those with a neck circumference above approximately 38 cm may find the collar tight. The fringe length is fixed and is proportioned for heights of 160-175 cm; on taller frames the fringe will sit shorter than mid-thigh. This is an overlay garment, not a structured top — it does not provide breast support and requires a fitted base layer beneath.

Material and Care

The collar band and fringe strips are cut from red vegan faux leather — a PU-coated fabric backing — which gives the fringe its stiff, ribbon-like fall without the weight of genuine leather. The waist belt is the same material. Because the fringe is individual cut strips (not sewn down), avoid machine washing, which causes tangling and fringe distortion. Spot clean only with a damp cloth and mild soap; hang flat to dry. Store flat or loosely rolled — do not fold across the fringe, as sharp creases in PU leather are difficult to remove. With careful storage, the material resists peeling for moderate use.

• Material: PU-coated vegan faux leather, red
• No lining — open fringe construction
• Spot clean only; do not machine wash or tumble dry
• Hang flat to dry; store flat to preserve fringe alignment