Red Faux Leather Waist Harness with Adjustable Shoulder Straps

This red faux leather waist harness combines a structured flared skirt panel with fully adjustable shoulder straps and two long dangling tassels attached via silver O-rings — giving it a silhouette unlike a standard flat belt harness. The waist section fastens with a double-buckle front closure, and the shoulder straps each have their own silver slider buckle so you can dial in the fit independently.

Styling for Everyday & Going Out

Worn over an oversized white shirt for daytime, the red faux leather skirt panel reads as a structured belt-skirt hybrid — a practical way to add a defined waist to loose layers. For evening, pair it over a fitted black turtleneck bodysuit: the tassel drops swing at mid-thigh and add movement to an otherwise minimal outfit. The silver hardware reads as jewelry against matte red faux leather, so extra accessories are optional.

• Layer over a loose linen shirt for a structured daytime look
• Wear over a bodysuit or crop top for a night-out silhouette
• Pair with wide-leg trousers to contrast the fitted waist panel
• Combine with a midi skirt underneath for a layered editorial style

Sizing and Waist Fit

The waist belt panel is designed to sit at the natural waist. Adjustable shoulder straps extend from approximately 35 cm to 55 cm (measured from the waist band to the strap end), accommodating torso lengths from short to tall. The waist belt section uses a standard prong buckle on a punched strap — best suited for waist measurements between 62 cm and 82 cm. If your waist exceeds 85 cm, the flared skirt panel may not sit flat at the hips. The tassels hang approximately 25 cm below the waist band and are attached by fixed silver O-rings.

Faux Leather Material and Care

The body is constructed from smooth matte faux leather (PU-coated fabric) — it has zero natural grain texture, which gives the red color an even, saturated finish that looks the same in daylight and artificial light. Hardware is silver-tone zinc alloy; the tassels are cut from the same PU material as the main body. Because PU faux leather does not breathe, extended wear in warm conditions can feel warm against skin — a lightweight layer underneath helps.

• Wipe clean with a damp cloth; do not submerge in water
• Do not tumble dry or iron directly on the surface
• Store flat or hanging to prevent permanent creases in the panel
• Avoid prolonged contact with light-colored garments to prevent dye transfer

Hardware and Closure Details

Four silver-tone buckles are used across the harness: two on the shoulder straps and two on the waist belt. The front waist closure is a stacked double-buckle arrangement — both straps share a vertical center position, creating a structured front placket effect. The O-ring attachment points for the tassels are welded rings, not split rings, so the tassels are secure but not removable without tools.

• Silver-tone zinc alloy buckle hardware on all four adjustment points
• Double front buckle closure creates a structured waist panel look
• Welded silver O-rings hold the tassel drops securely in place
• Shoulder strap width approximately 2.5 cm — wide enough to stay on shoulder without digging