
Piente
Color
Please select a color
Size
Please select a size
| Care Instructions | Wipe with damp cloth and mild soap; do not machine wash or submerge |
| Lining | Thin woven fabric backing on strap interior |
| Closure | Side-release buckle on lower hip band; riveted fixed points |
| Material | PU faux leather outer, fabric-backed inner lining |
Related Searches
Bold red faux leather harness with a vertical column of silver O-rings linking chest to waist.
This red faux leather body harness is built around a vertical column of five silver O-rings that run from a chest triangle down to a waist triangle, forming a garter-style silhouette unlike a standard cage or full-body harness. The narrow straps — approximately 1 cm wide — keep the look graphic and structured without adding bulk.
Two diagonal shoulder straps branch from a center chest point and meet a horizontal neckline band, creating a V-frame at the top. Below, a single vertical strap connects five evenly spaced silver O-rings down to a lower triangular hip band with a small side-release buckle. The geometry is straightforward: wear it flat and all five rings line up in a clean column down the torso.
The upper chest section fits bust measurements roughly 75-100 cm, and the lower hip band adjusts via its buckle to sit at 65-95 cm waist or hip, depending on how low you wear it. The harness lays flat over clothes or directly on skin — note that it is not padded, so the 1 cm strap width may feel narrow on wider torsos during extended wear. Sizing up one step is recommended if your measurements fall at the upper end of the range.
The garter-style cut works well layered over a white fitted t-shirt for a contrast-color street look, or worn directly over skin under a sheer blouse for an evening-out silhouette. For festival or costume styling, pair the red straps with high-waisted black wide-leg trousers — the O-ring column acts as a front focal point. The color is a saturated, true red, which photographs strongly against both light and dark backgrounds.
The straps are cut from faux leather (PU-coated fabric) — smooth on the outer face, with a thin fabric backing on the interior. Hardware is silver-tone zinc alloy. To clean, wipe the faux leather surfaces with a slightly damp cloth and mild soap; do not submerge in water or machine wash, as prolonged moisture weakens the PU bonding at the stitched rivet points. Store flat or loosely coiled to prevent permanent kinks in the narrow straps.
Red Strappy Body Harness with O-Ring Detail
$23.85No reviews yet.
You can only review products you have purchased and received.